Thứ Bảy, 18 tháng 2, 2017

Youtube daily Feb 18 2017

Oh hello!

Can I please speak to Hillary Clinton?

Erm I'm calling from the office of Julian Assange.

It's very important.

All of the US Department of State cables...

We have intelligence that they are about to be put on the web unredacted - not by us.

This is an emergency.

[writing] But when I say, they're about to go.

They're about to go.

I don't think we have very long.

So...

Julian (whispers): Just put him on.

Who is he?

Who is he?

OK Let me put him on the phone to you.

Hold on a moment.

She: He's the senior watch officer.

Julian: Hello.

Who am I speaking to, please?

G'day g'day.

This is Julian Assange.

Ermmm...

I would like to speak to the most senior person available who can execute an action quickly

to send someone to location here in Norfolk where we can discuss details that cannot be

discussed over the phone.

To try and make it clear.

We don't have a problem.

You have a problem.

For more infomation >> What Do Hillary Clinton, Google & Wikileaks Have To Do With Each Other? - Duration: 1:37.

-------------------------------------------

How to make EASY and FAST Bracelets - DIY | JuanTu3 - Duration: 7:40.

Hello, to make this bracelet you need

two ropes, each one meter

long by 3 to 6 mm thick

and scissors, let's start

First joins the two strings

making two simple knots

takes any string

and tie a knot in the middle

then introduces this knot

second rope and half made

the same knot again so they can be

unite in half with two simple knots

then at each end do

a series of simple knots

to complete the width of your wrist

then a type Diamond Knot

and then the entire process

You'll be able to finish your bracelet

It may seem complicated each node

but if you look careful way

you will notice that they are simple knots

perhaps the only complicated knot

and quite complex to make

It is the Diamond Knot

but if you look carefully

even you can make complex

then the whole process and provide

attention to every part

You'll be able to get your bracelet

We ended Bracelet

It is easy, each knot is very

simple, the only difficult knot

Diamond Knot is the type

if you do not understand

You can see it in other videos

I wish you success with your bracelet

waiting for you like the video

questions in the comments and see

an upcoming video, many successes

with your wrist and see you soon

bye.

For more infomation >> How to make EASY and FAST Bracelets - DIY | JuanTu3 - Duration: 7:40.

-------------------------------------------

Tired Triathletes vs Rested Triathletes - Duration: 6:42.

- Ah, ah?

(swoosh)

- I'll get to you later.

(swoosh)

(swoosh)

- Darn, trainiacs.

- Good morning, contraband pool box.

- I really have no idea what the swim is gonna be today.

Friday is supposed to be a speed day, okay,

but it's also rest week, okay,

and then Wednesday they were doing

open water toe drill training sets, okay.

It's like a cracker jack box of swim workouts today.

I don't know what I'm gonna get.

If you don't know yet, you know that I feel mixed

about getting a blue kick board.

(upbeat techno music)

- 50 pass, 100 recovery,

and then back up (mumbling).

- You guys go, I need different goggles.

- If you ever have a hard time

keeping your goggles on while diving or in a race,

snap your goggles down,

put the cap over the top with the edges covered.

You can do this in a race with one cap on,

goggles, and then your race cap.

- Hey, whoa, whoa, whoa!

- Sorry guys, I'm sorry.

We are gonna hold you up.

Okay, so we're gonna do a little bit of dry land work,

some box jumps, kettlebell swings,

a little bit of medball work,

and then if you haven't noticed,

the gang has been getting a little quirky,

so there's some serious differences

between a rested triathlete and a tired triathlete,

so now we're gonna do one of those things

that's just gonna cut into a little skit

comparing the difference.

(goofy music)

(alarm beeping)

(groaning)

(alarm beeping)

- 30 wake up for swimming!

Let's go.

- Ow, ow, ow, ow, ow, ow, ow, ow.

(upbeat music)

- Top of the morning, fellas!

(goofy music)

- Terry, do I need to make you some coffee there?

- If you want my eyes to be open

when you're talking to me today, yes.

- Hey Terry, do you want to make some coffee?

I'll make some for you.

- Well you know what, Teddy?

I actually have an absolute abundance of energy,

and I wouldn't need coffee,

but you asked so nicely,

I'd love one.

(hip hop music)

- Yeah!

It's gonna give it to you!

Oh yeah, mm, mm!

(goofy music)

- Hey, got all the stuff ready.

You ready to go on the shoot?

- Yeah, yeah, can you just carry a few things for me?

- Yeah.

- That, and that, okay, and get the drone.

I'm really tired.

- Yeah, yeah, that's fine.

- Just like that.

- Can you get this?

Yeah, here, one more hand?

- Yep. - Okay.

- Okay. - Alright, here.

Yeah, just tuck that under.

Yeah, right there.

- Where?

- Perfect, okay, we're good, yeah, yeah, alright.

Let me, here, I'll get that for you, yeah.

(clapping)

- Hey, you look ready to go to your shoot.

You wanna go?

- Yeah, I've got it all!

We are ready to go!

(laughing)

- (mumbles)

Some things don't change.

- Ah, ah?

Am I right?

This what I've been seeing

for my training group for five days.

It's triathlon life.

See you trainiacs.

For more infomation >> Tired Triathletes vs Rested Triathletes - Duration: 6:42.

-------------------------------------------

Woodturning a Natural edged, lipped walnut bowl ! - Duration: 4:40.

Hello everyone !

today i have a piece of european walnut

i have choose this piece

that 4 branches are in the same piece of wood so this will give a nice effect !!!

so lets Start !!

i catch with the chuck the screw

then i put one the wood !!

after i secure it and i check if the wood hit the tool rest

i am start to turning this piece with my finger nail bowl gouge !

then i use my bedan tool because is more steady and i have a lot of vibration on the begin !!

then i am start again with the finger nail bowl gouge !!

because of the shape of this bowl i have a lot of vibration

the screw thread break

so i make a bigger howl and i will catch it on the chuck !

i use again this bowl gouge !! i don't know why but i feel very good to work with it !

we need to stop and check our bowl ! is details that we can't see as the wood turn !!

i use a skew chisel to make the curve more round !

than i take of the tailstock and i start to make the tenon with a straight chisel

and then i start sanding as usual with 180 grit sandpaper

some hand sanding was required

320 grit

i see some very bud details do i start again from 120 then 150,180,220,360...

we don't forget when we sanding to where our dust mask

i need now to change the claws of the chuck !

i start again ! i make a bit straighting with the fingernail bowl gouge and then i use for some details the straight chisel

big holes are always dangerous but.... we love to turning rotten wood !!!

long time work with the bowl gouge and then i start to finish the bowl !

round nose scraper ! and after some measuring for be perfect !!!

i make just a bit smaller the lips because is not looks nice !!

and my Brother again asking for a drill bit !

round nose scraper !

and the i start to sanding 180 grit

240 grit

a lot of hand work !!!!

320 grit

oil ....... and 400 grit sandpaper

600 grit

800 grit

1000 grit

and then i clean it with a napkin

my bowl is ready

i hope you like it and enjoy the video

we will speak again next sunday

until then take care !

For more infomation >> Woodturning a Natural edged, lipped walnut bowl ! - Duration: 4:40.

-------------------------------------------

Cristais - Alan Holden - Duration: 24:28.

I suppose most of you have seen a crystal at one time or another,

probably in a natural history museum or in a chemical bottle.

Here is an unusually big crystal

dug out of a clay pit in Brazil.

Here's a smaller one,

broken from the side of a cleft in a rock in Arkansas.

But crystals aren't always big, beautiful things like this.

As a matter of fact, crystals are everywhere.

The salt you use to flavor your food for example.

It consists of little crystals of sodium chloride.

You can see their shapes by looking at them

through a magnifying glass.

Little cubical crystals of sodium chloride.

Snow, here are some enlarged pictures of single snowflakes.

Each is a single crystal of water.

Here's a crystal I like especially well,

probably because I made it myself.

It's a crystal of alum.

As a matter of fact, you can make a crystal just like it.

I put some directions in the film notes

in case you want to do it yourself.

You buy the alum you need at a drugstore

and grow the crystal in mason a jar.

If you do do this i'm sure you'll be very much impressed by one thing:

the crystal keeps growing, maybe for a week.

It keeps getting bigger,

but all the time it has plane faces...

meeting in sharp edges.

You can see I haven't ground the faces on this crystal

or polished them at all.

This is just the way the beast grows.

It almost seems as if you were getting something out of nothing.

Something with a shape all its own,

which it decides all by itself throughout its career.

In order to grow a single perfect crystal as big as this,

you have to take pains and let everything happen slowly.

But you can see what's actually happening

by letting things happen a little bit faster,

and looking at the business under the microscope.

I'm going to take a solution of alum

which is just itching to deposit crystals

and make a little pool of it on the microscope slide...

and then add a few little crystals of alum

to give the alum something to deposit on...

and then get myself in focus

and let 'er rip.

There they are, you can actually see them grow

if I turn now to a higher magnification.

The little crystals keep pretty much the same shape as they grow,

just getting bigger.

Naturally they all sit down on the microscope slide

on one of their biggest faces.

So you see the shape of the crystal

depends mostly on what the crystal is made of, and not on its size,

so long as it's free to grow in all directions.

Now crystals don't only grow out of solutions.

They grow out of gases.

Snowflakes, water crystals grow that way,

and one of the places,

one of the most important places where crystals grow

is out of melted materials when you cool them.

Here I've got another powder you can get at the drugstore,

called salol,

which melts to a convenient temperature.

I'll put a little of it on a microscope slide.

I'll carry it over here to the hot plate...

and melt it.

And now let's go over here to the microscope.

There's one growing, turning very slowly in the liquid as it grows

because it hasn't quite sat down on the slide yet.

It seems almost to push those flat faces ahead

through the part that's still melted.

Of course you know that the whole crystal isn't moving

and shoving its front along.

The liquid next to the face is becoming solid

and adding itself to the face.

But it's doing this in such a way

that the stuff added on also forms a flat face,

so the crystal keeps its shape while it grows.

Now, I'll melt this, but

carefully on the hot plate so as to leave just

a little rounded blob of crystal.

That rounded blob will be a single crystal,

but it won't have flat faces,

and I want you to see what happens

when this cools down again under the microscope.

There it goes

growing the faces it wants to have,

filling in the hollows

and squaring off the rounded corners

so that its boundaries are all flat again.

Notice now what happens when two crystals

bump into each other so to speak.

They don't push each other around,

they just stop growing where they meet,

because they've used up all the stuff to grow with there.

So the boundary between two crystals

isn't necessarily one of the natural faces

on either of them.

The boundary line just depends on

how the crystals happened to come together.

When the whole thing is finally frozen

you have a dense mass of crystals.

Maybe no single one of them shows any of its natural faces,

but the whole mass is made up of crystals just the same.

Almost all rocks are made up this way.

Granite is a good example.

Here's a hunk of it.

Let's take a close look at it.

You can see grains of the different colored minerals

which make up granite.

Here's a gray strain of quartz,

here's a grain of pink feldspar,

and the little black flecks are grains of a kind of mica.

And each of these grains will be a single-crystal.

Notice that the three things don't mix together in the solid.

They crystallize out in separate grains.

Before i get through you'll begin to see why.

When you came in,

I was melting some bismuth in a crucible over here,

and it's been cooling,

and crystals ought to have formed on the sides of the crucible,

so that when i pour off the part of the bismuth that's still melted,

you can see them.

Sometimes you can show up the crystals

in a finished piece of metal

by polishing the surface and then etching it carefully

with something that will eat away the metal.

Here's a cast brass door handle

which the manufacturer had polished,

and then over the years

the sweat on people's hand etched it,

and now you can see the boundaries between some of the crystals

which make up that door handle.

In those pieces of metal,

the crystals are much smaller than these crystals

because they've been broken up

when the metal was drawn, or rolled, or hammered into shape.

But the metal is crystalline just the same.

Well, so almost all solid things are made of crystals.

In fact if you ask a physicist these days

to define a solid, he'll probably say

a solid is a bit of matter that is crystalline.

Of course that doesn't seem to get them very far

because somebody is sure to ask what do you mean by crystalline.

But he's got an answer to that one.

The answer comes in two parts.

The first part says all matter is made of atoms.

The second part says in crystalline matter

the atoms are arranged in regular order.

I want to talk a little more about what he means by this,

and show you a little of the evidence for it.

The idea is that the crystal is a pattern of atoms,

a regularly repeated pattern of atoms

like the regularly repeated pattern of the wallpaper.

If the atoms were flat

and made a two dimensional crystal

they might be taking up an orderly arrangement,

like this arrangement of pennies on the table.

In three dimensions,

they might be making an arrangement like these bearing balls,

closely packed together.

Of course, these close packed arrangements

aren't the only arrangements the atoms might take.

They're just simple examples of what I mean.

Now already perhaps

you can see what these two ideas -

the idea that the crystal is made of little units,

atoms or molecules, all alike,

and that those little units

are arranged in the crystal in a regular array -

you can see how those two ideas

would explain what you've been looking at under the microscope.

For instance, those alum crystals

kept the symmetrical shape as they grew.

Now suppose you had a two dimensional crystal,

like with a pattern of atoms like the arrangement of pennies.

There are more atoms and solution, all around it,

but since the arrangement is symmetrical in the crystal,

you expect pennies to add themselves on at the same rate here,

and here,

and here, and so on,

because conditions are the same with all those places.

The crystal will grow symmetrically

and keep its shape

so long as nothing gets in the way

and prevents more atoms from reaching the surfaces.

Let me show you another kind of evidence for these two ideas.

It's the kind of evidence which doesn't come from the process of growth.

It comes from the properties of the finished crystal.

This is the evidence of cleavage.

If you ever handled mica, you're acquainted with cleavage.

The mica crystals you find in nature

come apart easily in one direction

and not in any other,

so that you can split them into extremely thin tough sheets.

The mica acts as if it was made like a book,

with a lot of leaves of tough paper,

but if you actually try it,

you'll get the feeling that there's no limit

to the thinness of those leaves of paper.

You'll feel that if you were skillful enough,

you could split each leaf of the mica in two,

and then each of those in two again, and so on.

It makes you guess that the atoms in the mica

are arranged in great sheets,

but the atoms are bonded together very tightly in the sheet,

and the bonding forces between the sheets are very small.

Just the arrangement of atoms in sheets like that is a kind of orderliness.

There aren't many crystals that cleave as well as mica.

Alum for example doesn't cleave at all,

bus a great many crystals do cleave amazingly well.

Let me show you the cleavage in this crystal.

It's a crystal of nickel sulfate hexahydrate.

It cleaves parallel to this face.

I'll put the thing down on a little plaster seen to hold it in place.

I'll take a single edge razor blade,

and direct the blade parallel to the face,

and give the back of the blade smart tap.

She comes apart.

And now look at that,

as flat as you please.

You may say: oh you picked a special place in the crystal.

But look,

I can cleave it again,

parallel to that same face,

and get a thin plate out of the thing.

So it isn't a special place in the crystal.

It's a special direction in the crystal.

Now, maybe you'll say

all that isn't any special direction,

you've got a sharp razor blade and you're cutting the thing apart with it.

Alright, if that's what you think,

let me try the same stunt in a different direction.

I turn my razor blade in a different direction

and I whack it,

and nothing much happens,

until I whack it a lot harder,

and finally, of course, the thing busts

and there's no nice flat face.

It's just broken apart like anything else.

Now let me show you the cleavage in another crystal,

a crystal of sodium nitrate.

Here's a crystal

that cleaves in three directions, not just one.

I can cleave it here, like this...

and I can cleave it here, like this...

and here, like this.

By the way, you can grow both of these crystals,

nickel sulfate and sodium nitrate,

by recipes given in the film notes

in case you want to play around with the stuff yourself.

Sodium nitrate has a lot of interesting properties.

It has most of the properties of the mineral calcite.

When big crystals of calcite

were first discovered about 300 years ago,

in a quarry in Iceland,

the scientists of that day got hold of some

and their studies of the stuff

made the first big start in our understanding of crystals.

As I say, sodium nitrate and calcite have many properties in common.

In particular, they both cleave the same way.

When those earlier scientist saw the way calcite cleaves,

they had the idea

that maybe calcite was made of tiny building blocks,

all alike,

and all having the shape of little cleavage blocks of calcite.

You may be inclined to laugh at this

and say the calcite, like all matter, must be made of atoms,

and atoms don't look like building blocks.

Okay, you're telling me.

What do the atoms look like?

Little hard round iron pellets?

Don't let me fool you with those pennies

and bearing balls I've been showing you.

They just show where the atoms are,

not what the atoms look like.

For all I know, the atoms look like four leaf clovers.

I want to emphasize that those early scientists

produced both of the main ideas

which go into the picture of a crystal that we have today.

First, they were saying

crystals have an ultimate fine structure:

the building blocks.

We would call them small groups of atoms instead of blocks,

but the difference is really more a matter of words

than of anything else.

Second, they were saying

that structure has a regular array.

The blocks are stacked up in a regular order,

and they keep stacking up in regular arrangement

as the crystal grows.

It turns out that you can think of any crystal,

not only crystals which show cleavage, but any crystal,

as made of little blocks, stacked up in regular array,

without overlapping, on top of one another,

and side by side,

if you choose the right shape of block.

In the case of alum the right shape of block is a cube,

and you can think of the alum crystal

as made of little cubes,

all stacked up,

on top of one another, without overlapping, this way.

Notice that I've made the main faces

on the model of the alum crystal

by stepping back the cubes as I piled them up.

At first you might think that would mean

that the faces would be pretty rough.

But you got to remember that these little cubes

are really only a few atoms wide.

Their sides are only about one ten-millionth of a centimeter long,

and you wouldn't feel that roughness,

or even see it under the microscope.

One of the things that gave early support to the building block idea

was the fact that all crystals of the same stuff

have the same angles between corresponding faces.

The crystals might be very different in size,

they might have grown at different rates on different faces,

so that they have different overall shapes,

like these two alum crystals.

Nevertheless, the angles between corresponding faces

of all crystals are the same,

so long as the crystals are made of the same material.

It also suggests very strongly

that each material forms its own building block,

which gets repeated again and again

as the crystal grows.

Most crystals can't be made out of cubic building blocks

as alum can.

Their building blocks don't have the same length on the different directions.

For example, here is the arrangement of atoms

in the cubic building block for iron.

It's fairly simple.

Now look at this model of the building block for garnet.

It represents an elaborate grouping of a hundred sixty atoms.

But this study isn't easy,

don't get the idea you can turn on the x-rays

and out rocks the answer.

It's a very specialized kind of study.

But once we know what arrangements atoms take in crystals,

we can begin to add why they take those arrangements.

We're really only just beginning to get that kind of knowledge.

Now, turn back for a moment to the microscope

and remind yourself of what is happening while a crystal grows.

Atoms are constantly arriving at the surfaces

and adding themselves onto those surfaces in an orderly way,

and they're doing this at an amazing rate of speed.

The crystals you're looking at are going fairly fast.

Suppose a crystal grew at the rate

of only a couple of millimeters a day, which is fairly slow.

You can calculate

that about a thousand layers of molecules

would have to be laid down per second on the surface of that crystal.

And all the molecules have to be laid down

in the right sort of order.

I want to borrow a trick from Sir Lawrence Bragg

to give you just a rough idea

of some of the things that we think must go on as the crystal grows.

Sir Lawrence blows soap bubbles.

He blows them in a pan of soapy water,

tiny bubbles which rise to the surface

and collect in rafts.

The bubbles behave a little like atoms because

when they're floating on the water

they attract one another a little,

and when they touch,

they stick to one another quite strongly, as atoms do.

But again, like the atoms,

they have a squashy sort of size,

so that they take up space.

Watch how the bubbles collect together into an orderly arrangement.

It's the same as the arrangement of pennies I showed you,

the so-called close-packed arrangement.

Notice that the rafts are made of large parts.

All of the parts have the same sort of order,

but the orderliness of the parts is turned in different directions,

so that there are grain boundaries between the parts.

This is like a solid made of lots of crystals

which started growing in different places and finally joined.

It's like the salol after it's all solidified,

or that brass door handle.

When you think of how fast the atoms have to get into order,

much faster than this,

the more astounding their achievement seems to be.

But this will give you some little idea

of what a hustle and bustle must really have to go on

on an atomic scale.

Sometimes, when the molecules are very big

and have an irregular shape,

they're too sluggish to get themselves arranged in the order.

Then they congeal into a glass.

A glass is very much like a liquid,

but it's like a liquid in which the molecules

are no longer able to move past each other.

It has patterns of order in the midst of disorder.

The disorder is frozen in place so to speak,

and can't get itself rearranged into order.

Liquids and glasses are pretty disorderly arrangement of molecules,

and gases are the most disorderly arrangements of all.

The only order in gases

is the arrangement of atoms grouped in each molecule of the gas.

Later in this course, you'll learn more about gases.

But already you can see why gases

are still very much alike in a great many ways,

whereas there are so many different kinds of solids.

The only way gases can differ

is in the kinds of molecules they are made up.

But solids can differ also

in the kind of orderliness which those molecules take up

in the crystals which comprise the solid.

I can show you this selectiveness

actually happening in some of the materials you already looked at.

I'll melt some salol on the hot plate over here.

There...

I bring it over to the microscope and let it cool down,

so that it wants to crystallize,

then I'll seed the salol

with a tiny crystal of alum.

Nothing happens.

No salol will crystallize on it.

Now I'll seed the melt...

with a few little crystals of salol,

and you can see the salol crystals grow,

leaving the alum crystal unaffected.

The orderliness of alum is not the right kind of orderliness for salol,

and the salol simply waits

until the right kind of orderliness is presented to it.

And I think now you can see what I promised you would see about granite,

why it is that the three different ingredients,

quartz feldspar, and mica,

form three separate kinds of crystals in the granite,

and don't form just a single crystal

in which the molecules of quartz, feldspar and mica all take part together.

It's because those three kinds of molecules

normally form crystals with three different kinds of order.

When the three kinds of molecules are all together,

they can't find a kind of order which is common to all three of them,

so they crystallise out separately,

each in its preferred way.

You know, after 20 years of growing crystals,

I still find the whole business nearly miraculous.

You go to the microscope to watch it,

and it happens again,

and you know that the atoms are at work,

busily, almost unerringly constructing something,

something regular, something orderly,

constructing something, which from an atom's point of view,

is simply enormous.

For more infomation >> Cristais - Alan Holden - Duration: 24:28.

-------------------------------------------

How to Pentasport Torpedo 5 speed hub cleaning and repair Vlog Style - Duration: 24:34.

For the first check which damages are present, I have already disassembled the hub.

At first sight nothing is broken. The hub has not switched since it is totally filthy and resinified by old fat.

The small plastic screw also sits firmly, but I could clean the switching rod on the side well so everything OK.

The principle of the 5-speed hub is the same as the 7-speed hub.

From the 7 speed you will find a video to my playlist.

After the clean make the sun wheels move again.

The backbrake does not work because the cone and the latches are also totally resinous.

Since the latches remained stuck, I had then synonymous no drive at the lostreten.

So first nothing broken. Now everything is nicely cleaned.

And then we go to the functions.

It is simply better to show you this in a clean state.

During the cleaning I have found something broken.

Since you can see that everything is quickly disassembled and one quickly overlooks the overview.

That's why I've sorted here everything nice.

When cleaning the brake, have found a broken washer.

No idea how the break could, something I see the first time.

This comes between planet carriers and backup clips.

It is identical to the disk of the SRAM 7-gear and I have already lie here.

Always use only normal grease.

Never use oil or chain lubricant or mounting paste, which is not good for gear hubs.

I'm going to get fat now.

I wanted to go outside, but since it was raining heavily I had to get in quickly.

Grease, WD40 and brake cleaner is now there.

I want to make the axis again a little wd40.

I would not just grease the ax.

Even very little wd40.

I could not quite extend this switch unfortunately.

And then you have to improvise a bit.

Really just a little grease.

Pay attention to the correct installation side for the gearwheel.

The spring can become jammed and rotate.

All parts are only slightly greased by hand.

Now push the spring, then a washer and the securing clips.

Now push the spring plate and the spring.

The thrust block oil slightly.

Now insert the thrust block.

Now assemble the clutch wheel.

Pay attention to the smooth and curved side.

The smooth side downwards.

Mount the fuse ring.

Now fit the pawls on the ring gear. Pay attention to the direction of travel of the pawls.

Also pay attention to the spring, which does not bend when mounting.

The ratchets can be used better when the spring is lifted.

A functioning ratchet, the same now with the other latch.

Now the gearbox on it. Make sure that all points are visible.

Now sit the axis and can now again control the points.

Now put the new washer and the clip on it.

Observe the position of the clip.

Now fit the clutch wheel into the ring gear and mount the ring gear. Now you can see why the smooth side down.

Now check the points again.

So you can mount the gear synonymous with the sram 7 gear without stencil vor the points.

Now mount the bearing ring correctly.

Now mount the bearing ring correctly.

Then mount the large spring.

Now mount the impeller.

Now fit the washer for the spring and the spring.

Mount the ball ring ...........

........and screw on the cone.

Now mount the shift rods.

Great.

I have here now a little clean as the table was already greasy.

I do not want to get any trouble with my wife.

Finally assemble the brake as shown.

Also observe the direction of travel in the pawls on the brake cone.

With greasy fingers, it's all slippery.

Return spring mount.

Brake cone put on.

Place the brake shoes together with the spring ring.

The spring is very hard and it is a little difficult.

Rub the brake shoes with brake caliper grease.

Now everything in the hub sleeve pure.

Install brake lever with bearing ring.

Set the bearing clearance.

If you like it, then keep a thumbs up. See you at the next video!

For more infomation >> How to Pentasport Torpedo 5 speed hub cleaning and repair Vlog Style - Duration: 24:34.

-------------------------------------------

TIN MỚI 19\2 - Biến Cố Lớn Chính Trường Mỹ có Làm Donald Trump GỤC NGÃ (#757) @News4U - Duration: 19:20.

For more infomation >> TIN MỚI 19\2 - Biến Cố Lớn Chính Trường Mỹ có Làm Donald Trump GỤC NGÃ (#757) @News4U - Duration: 19:20.

-------------------------------------------

Left 4 Dead 2 #1 | Time to play! - Duration: 22:51.

Hey there Bots, my name is Boss-Tron Bot and today I am playing Tanks Playground in Survival mode!

Không có nhận xét nào:

Đăng nhận xét