Hey, whats up guys.
I'm Ryan from ExtremeTerrain.
And today, I'm here with the TruShield FullShade Top fitting your '97 to '06 Wrangler TJ.
Now, this is for the TJ owner looking for an easy way to protect themselves and the
interior of their jeep from the harsh rays of the sun.
Whether you're just cruising down that road or you're hitting those trails and looking
for some coverage and shade, you really can't go wrong with this top.
Now, this top is gonna provide protection for the front and the rear and it even has
interior zippered pockets allowing you to store those precious items.
Not only that, but this top is gonna fit underneath of your soft top and your hard top and it
can be stored anywhere in the jeep when you're not using it.
Now, this is made of durable woven PVC coated polyester and it even has a UV coating protecting
it from the sun's rays and fading.
Now, this is reasonably priced on the site at around $100 when compared to other options,
and it even comes with a great three-year warranty.
Now, as far as install goes, I am gonna give this a one out of three wrenches since you
can install this in about 15 minutes using the supplied bungees, and the best part is
there's no header channel required or drilling.
Now, with that being said, let's hop into the install.
So we're gonna begin our installation with our top off.
If you have a hard top, you're gonna want to remove it.
And if you have a soft top, you can just fold this back.
So, we are gonna take our sunshade and unravel this and you're gonna find a mini carabiner
in the front.
This is gonna hook on to the footman loop.
So we're gonna start with that at the front.
So we're gonna hook our mini carabiner into our footman loop on the front, making sure
that our zippered pockets face inside the jeep.
So we're gonna take our sunshade and we're gonna pull it over our soundbar and start
with our rear bungees.
So, you're gonna push the bungee through the hole and then we're just gonna go around and
attach that around that ball.
So we're just gonna do a couple of these on this side.
And then we'll get some done on the other side.
So, we're gonna do the same thing on the other side, starting with that rear bungee.
Now, we're gonna work our way up towards the front, just attaching the bungees as we go
along.
So, we're gonna do the same thing for the other side to get these bungees on.
One nice thing about this sunshade is that it actually has this built-in zippered pocket
up here.
Now, the whole thing is made of PVC coated polyester.
So, it's gonna be really durable and it's gonna handle the sun's rays.
This pocket is actually coated in polyurethane so it's gonna give you a waterproof area to
store stuff and also keep things out of your way.
So, let's get these last few bungees installed and then this will finish up the installation.
So that wraps up my review in install.
For more videos like this, check us out at extremeterrain.com.
Không có nhận xét nào:
Đăng nhận xét