-------------------------------------------
Top 10 Grown Up Tv Child Actresses Real Age ! 2017 - Duration: 2:47.
Top 10 Grown Up Tv Child Actresses Real Age ! 2017
-------------------------------------------
Dynasty | Carrington vs. Carrington | The CW - Duration: 1:39.
For more infomation >> Dynasty | Carrington vs. Carrington | The CW - Duration: 1:39. -------------------------------------------
How to Draw a Snow Leopard - Narrated - Duration: 4:24.
Hello my friends and welcome to another Tuesday of tutorial!
I am Leonardo Pereznieto and today we will draw a snow leopard.
We begin by loosely sketching a circle
like this…
Then we draw an axis, for the eyes and a vertical guideline for
the middle of the face.
Like so…
I will actually change it slightly.
Like this.
More of a horizontal plane.
All the way down here where it touches the circle, we
draw the tip of the nose with an upside down triangle,
and underneath, the mouth and side of the snout.
And then we come up a long the nose, which guides us to the upper
part of the eyes.
With a kneaded eraser, I lighten up the lines, a little bit
I make a correction because this should be curving a little bit more.
And here should be the center of the nose, the center of the mouth,
and the center of the lower jaw.
Let´s draw the lips and the eyes.
Normally we should be able to see practically all the lower part of the
circle of the iris, that´s the color part of the eye, while the upper part is
partially covered.
I made the sketch line with a mechanical pencil, and now for the shading
I will use a hard charcoal pencil.
This is obviously for the darks.
Later, I will also use a white pastel,
and I am drawing on a light gray paper.
The list of materials is in the information below the video.
Around the eyes is very dark.
And they do have a lot of spots,
which on the head, are small.
Their ears have a shape like this,
and their pupils, in the eyes are almost round, although
if you look at them closely they have a slight diamond shape.
But seen from a distance they look round so I will draw them this way.
And let´s delineate the eyes a little bit better, especially to even them out
because they look a little bit different.
When making the black spots, I don´t do them solidly, but rather with
a series of parallel lines, with the black pencil, so as to leave, little
blank spaces in between that will look like lighter hair.
Good!
And as I´m drawing on the gray paper, I can use white on it
to give a nice effect.
As I mentioned to you earlier.
With this we draw the white fur and reflections on the eyes, as
well as the whiskers.
I uploaded a long and in detail version of this tutorial.
to my Patreon account, the link is in the information below the video.
Snow leopards are gorgeous!
I think they are truly, some of the most beautiful animals on earth.
They are smaller than most of other big cats, and they have a long and thick fur.
Their tail is very long and fluffy, and when they sleep sometimes
they use it as a blanket, throwing it over their face and part of their body.
And that is because they live in very cold places!
Unfortunately, they are often been hunted to sale their nice fur.
They are only about 4,000 of them left,
but they are lucky that there are some organizations that protect them.
I like it how he is looking.
Very good!
¡Excelente!
It´s ready!
If you enjoyed it, please give it a LIKE! share it to your friends
and subscribe to Fine Art-Tips.
And I will see you on Tuesday ;)
Subtitled by Grethel Trejo
-------------------------------------------
Box Office for Happy Death Day, The Foreigner, Blade Runner 2049 - Duration: 13:06.
Hello and welcome to this week's Movie Math
where Jason Blum reminded everyone
that he's the original gangsta
when it comes to today's horror movie renaissance!
-------------------------------------------
Wymiana tylny bęben hamulcowy oraz klocki hamulcowe VW LUPO TUTORIAL | AUTODOC - Duration: 9:42.
Use a phillips screwdriver
Using a punch and a hammer remove the wheel bearing cap
Use a socket №30
Treat the brake shoe seats with a copper grease
-------------------------------------------
Sir Richard Branson On Staying In The Caribbean During Hurricane Irma | TODAY - Duration: 6:15.
For more infomation >> Sir Richard Branson On Staying In The Caribbean During Hurricane Irma | TODAY - Duration: 6:15. -------------------------------------------
Joe: Why Was Mitch McConnell There With Donald Trump? | Morning Joe | MSNBC - Duration: 10:06.
For more infomation >> Joe: Why Was Mitch McConnell There With Donald Trump? | Morning Joe | MSNBC - Duration: 10:06. -------------------------------------------
New Wave Of Dems Look To Reverse Tide For Party | Morning Joe | MSNBC - Duration: 3:28.
For more infomation >> New Wave Of Dems Look To Reverse Tide For Party | Morning Joe | MSNBC - Duration: 3:28. -------------------------------------------
What I Learned at Cornell Tech - Duration: 2:07.
Cornell Tech has really taught us
to work with each other, learn from each other,
to build products to make an impact around us.
For a Design student, it was nice
to have to kind of wrestle with different perspectives
because when you're surrounded by designers,
it's kind of one perspective and it's all about the user
but when you have an engineer who's thinking,
how can we build this efficiently
and business people who are thinking, we need to make money,
it really stretches,
it stretched the way that I think as a designer.
That process of learning how to tackle a problem
no matter what the problem is
as opposed to learning a specific answer
to any discreet issue.
I know when I go back to work as a product manager,
one of the most critical things I'll have to do is
work across the aisle and partner with engineers
and partner with marketers and partner with branding people.
So this experience has really enabled me
to learn how to do that for something that truly matters
and I wanna take those skills back with me
when I go back to work.
How to make a team work and how to overcome struggles
when you have to develop an actual product.
Fail fast.
It's a wide array of business, technology,
how things work in the industry and entrepreneurship.
It's not easy to pitch an idea, explain a product,
go through the vision and the business model in four minutes
but it's definitely something that we've mastered.
Be comfortable with the chaos because in technology,
oftentimes things aren't clear
and just how to steer that in the right direction.
How to work with a team, how to pick a problem to solve,
how to solve the problem
and the millions of other small details
that get in the way of doing that
and of course, how to handle them.
Coming from an engineering background,
I think Cornell Tech largely taught me how to manage
being pulled in different directions and think strategically
and be able to execute on something
that's founded in business fundamentals.
I've learned the business side
so what it takes to have a product idea,
to form a team around it and then to have it be a reality
which for a lawyer is extremely exciting and it's a rarity.
-------------------------------------------
Las Noticias de la mañana, martes 17 de octubre de 2017 | Noticiero | Telemundo - Duration: 5:02.
For more infomation >> Las Noticias de la mañana, martes 17 de octubre de 2017 | Noticiero | Telemundo - Duration: 5:02. -------------------------------------------
'We Hear You': Dem Offers Ideas For Wining Back Country | Morning Joe | MSNBC - Duration: 5:46.
For more infomation >> 'We Hear You': Dem Offers Ideas For Wining Back Country | Morning Joe | MSNBC - Duration: 5:46. -------------------------------------------
Reese Witherspoon Reveals She Was Sexually Assaulted At Age 16 | Megyn Kelly TODAY - Duration: 8:22.
For more infomation >> Reese Witherspoon Reveals She Was Sexually Assaulted At Age 16 | Megyn Kelly TODAY - Duration: 8:22. -------------------------------------------
SAMSUNG G610F DOWNGRADE MODEM - Duration: 3:03.
SAMSUNG G610F On nxt 64GB
OPEN Z3X TOOL
JUST SHOW YOU WHAT PROBLEM
TRY DOWNGRADE MODEM IF POSSIBLE
NOW CLICK ON PHONE AND SELECT MODEM FILE
PUT YOUR MOBILE DOWNLOAD MODE
CLICK FLASH
DONE NOW YOU TRY TO UNLOCK
THANKS FOR WATCHING
PLZ SUBSCRIBE MY CHANNEL
-------------------------------------------
Nia Vardalos Believes In Ghosts And Never Has Food Guilt | Megyn Kelly TODAY - Duration: 3:28.
For more infomation >> Nia Vardalos Believes In Ghosts And Never Has Food Guilt | Megyn Kelly TODAY - Duration: 3:28. -------------------------------------------
Final Fantasy XIV: Сюжет Stormblood (Финал) (русские субтитры) - Duration: 44:50.
For more infomation >> Final Fantasy XIV: Сюжет Stormblood (Финал) (русские субтитры) - Duration: 44:50. -------------------------------------------
"Er ist ein Monster": J.J. Abrams über Harvey Weinstein - Duration: 8:53.
For more infomation >> "Er ist ein Monster": J.J. Abrams über Harvey Weinstein - Duration: 8:53. -------------------------------------------
Musica Di Flauto Indiano E Flauto Sciamanico Per Rilassarsi - Flauto Rilassante Per Meditare - Duration: 4:08:19.
For more infomation >> Musica Di Flauto Indiano E Flauto Sciamanico Per Rilassarsi - Flauto Rilassante Per Meditare - Duration: 4:08:19. -------------------------------------------
How to connect I2C 16X2 LCD Display for Arduino - Duration: 8:19.
hello guys in this video I will show you how to configure I to see LCD display
with arduino watch this video till end to get complete information about this SQL
see display before starting the tutorial you can download the library files from
the description now let's get started
the components required are is arena board and this is LCD module with the I
square C module for male to female header pins on the USB cable first take
this LCD here known back side you can see four pins it is having one is ground
and another is VCC and third one is SDA and fourth one is a SCL now connect
the female pins to here one color to grow another VCC SDA
and SCL to turn on the LED of the display you must have these two pins
with this jumper now take the audio board here you can find the power supply
and long the ground of the module that is the first pin goes to ground
and second why that is VCC goes to 5 volts
and another pin SDA goes to the A4 of the unlocking and the last flight
that he SCL goes to the A5 here the connection is finished and now we've had
the here you can see they display first go to the tools and select the port and
then now upload it to the board
the core is successfully uploaded now we can see on the board like this
okay you want able to see here now you can see you can adjust the brightness
here by adjusting this now you can see clearly now let's check the code
here on coad you have to include the two libraries one is the wire.h library
to access the I2C communication and the another one is liquid crystal I bleh
way to access the functions of the I2C LCD module tool right and to
make it a print upon the display and first in this line we are initializing
the pins of the LCD display in the code and in setup we are studying the LCD
beginning it means it will display in 16 columns and two rows it's completely
activated and another one is LCD backlight to turn on the light of the
LED in before you see in the yellow light is glowing there if this one is
not there it will be default off and welcoming to the loop we can see here
LCD set cursor it means it will indicate so you can see the in there that there
are two rows here 0 0 indicates the for a position of the first row and first
column and I am printing the take maker there after the printing that I am
taking a delay of the thousand milliseconds I am in the time setting
the cursor at 0 1 coordinate I'd mean that it is a 0th column and first row it
mean the here it is second row here indexing start from 0 it means that here
first ones these first digit shows the column number and the second digit shows
the row number here the first row is indicated as the 0
and the second row is indicated as one and writing the that like a share in
this second row after writing that I am taking the day off eight thousand
milliseconds you can change this delay to get is actually to get the time
deviation between time difference between depending the different labels
after that if you want to clear it clear the display and that means they you have
to remove this and this from the display then the time function is the FC door
clear it will clear up this screen of the LCD and another tab and sitting
there cursor at 0 0 it means it's 0 2 column that means the first column and
the first row this is it first column it is second row I am in first column first
why I'm finding thee from the first one core first row I am reading subscribe
and here first column second row I am reading technical I am taking the delay
of a thousand millisecond aim to get the edge say it views like animation going
on there thus always don't forget to like share
and subscribe we'll meet again make sure you visit w-w-w dot awning bus calm for
more projects circus tutorials and tech updates to subscribe my youtube channel
and click on the pen icon to get notified on latest of your videos
Không có nhận xét nào:
Đăng nhận xét