Hello BiDünyaBoncuk channel followers. Welcome to the channel.
I am Nükhet Demiray.
In this video we will make a bracelet with Pwat technique.
I had already published this bracelet in my instagram account and very liked by you.
You wondered how to make it. So I have prepared this video for you.
I hope you like it.
We will work on the purple color a little later.
This necklace in my neck was made with pwat technique also.
I'm showing you tips on the video and give some information about the necklace.
But we work on the bracelet.
If you have not worked on the pwat technique before, I do not recommend starting with this model.
If you watch my previous videos and learn the simple modelling technique, this video will be more instructive for you.
Because I do not show every detail anymore.
I am trying to show this video with more guidance in tricky ways, thinking that you have learned from past videos.
I hope you will work on this bracelet and share results with me.
I wish you all easiness.
Now, let's have a look to our materials.
Here is the material list:
Three color 11/0 number miyuki seed bead
You can use 11/0 czech seed beads instead of miyuki seed beads.
We have Chinese crystals.
You do not have to use Chinese crystals.
You can use 11/0 or 9/0 seed beads instead.
I'm telling you the codes for the beads.
Cream beads miyuki code 2021
Purple bead miyuki code 454
Bronze bead miyuki code 457L
Number 1 Chinese crystal. The smallest size.
Beading thread, beading needle, scissors and leather strap.
Leather strap length is 21 cm.
width of it is approx. 0.7 cm
We will work on this strap
and just cover this distance.
There are already holes in the rest.
It is really handy
and fits every wrist.
I have a black-silver model in my arm.
I only used the 2 beads of Chinese crystal in the stripe.
I used 11/0 seed beads in butterfly pattern, silver and black beads.
I worked with two black beads in the middle of the stripe with the number one black Chinese crystal.
Our other model. I worked on it first and shared it in the instagram.
While I was working on this bracelet for the fist time, I first made all the bracelet and then put it into the strap.
It was a little difficult but it passed.
But in this video we work on the strap.
Because you will work more comfortable this way.
You will not try to push it in. We will make it on the strap.
Then we will make a 'strap loop' like this.
and our work will be completed.
It really gets very stylish.
I also worked on the necklace of the same model.
The schema is the same but we can get different figures by changing the beads.
I want to show you these.
For example this necklace is again made with butterfly schema.
I worked firstly on the center in this necklace.
I used 11/0 seed beads in cream, picasso and khaki beads.
I used 9/0 Gutterman seed beads just in the butterfly pattern.
First I made this distance.
Later, I gradually passed through the number 15/0 seed bead, one by one.
For this, I used 15/0 seed beads (for the cream beads and butterfly pattern khaki beads).
I used 11/0 seed beads on 4 beads (khaki, 2 picasso, khaki) on the stripe.
This is number 15/0 seed bead.
What I did differently is that I increased the cream bead line between the two butterflies by 15/0 seed beads.
Otherwise the butterflies were so close each other since the beads were so small.
I continued this way.
I finished one side and then the other side.
And I did the cover like this.
As you see it became a beautiful necklace.
Using different beads on your necklaces, you can get different figures.
Now, let's just go ahead and work.
I will show in the schema like this:
Now
Our first line is this one.
Starting rows are 1. ve 2.
First we put the stop beads and we string the beads in the first two rows on the thread.
Which beads are these?
1A-1B-1C-1A-1B-7A
Bead codes are:
Bead A - Cream
Bead B - Purple
Bead C - Bronze
Bead D - Chinese Crystal
Now after I have string these beads to my thread,
I work 13 row even count peyote, one from right, one from left by following the schema
Starting direction is from left to right
Later, on the 3. row from right
on the 4. row from left
on the 5. row from right
left
right left
I am working even count peyote including row 13
I do not show this stage here because I showed it in the previous 3 videos.
Watching those videos, you can see how to do it - One of them has a link up there !
Afer we have done it, it will be like this.
Now, using the join bead, we will connect it on the cross
This is the join bead.
We join this bead to here.
I put my needle go through the join from inside to outside.
And then I put my needle go through to the first bead , again from inside to outside.
I am pulling the thread tightly.
I go up through the join bead and the purple bead (Bead B).
I am pulling the thread tightly again.
They connected on the cross.
What do I do now?
Where am I on the schema?
My thread is out of this bead.
Here, purple bead (Bead B).
Now, I'm going to start making line 14.
For the 14. row I will work peyote with 1C, 1B and 3 times with bead A respectively.
1C (Bronze bead)
1B (Purple bead)
And 3 times with Bead A (Cream bead).
One
Two
and three
I finished the 14. row.
I'm on the 15. row
What do I do?
I will make 4 times bead A, 1C and 1B with peyote.
Let's do it now.
One
two
three
and 4 times with bead A.
Now 1C
So I make peyote with bronze bead, the pattern is already showing itself.
Once I make peyote with B (purple bead).
And now I am joining it
This is my seam column.
I go up the cream bead just right of the thread.
and
go through purple bead.
In this way, I continue to work peyote as you see.
According to schema, I continue to work from right and left by taking the beads.
and we're strapping.
It fits easily to the strap.
I can also turn it around.
After the bracelet gets longer turning around it becomes harder.
It turns around easily now, but later it will be more difficult.
So we will continue to work around our work.
Yes, now you will do it on this schema, including 25. row
After you have finished the 25. row, you do not have to follow the schema upwards.
Because there is a figure repeat interval.
This distance is figure repeat interval.
Now I'm going to change to other schema and you will see pattern repeat interval clearly there.
Our starting row was 1 and 2.
We made 13 row even count peyote. We connected them.
Then we worked on the peyote including row 25.
Now, I show you the work I completed earlier.
We can also put on the strap in this phase.
When attaching, the stop bead must be pointed towards the buckle, so it should stay down.
When we work, the direction will be upwards.
Now I show you the pattern repeat interval.
But before I showed up, I forgot to tell you something :(
Reserve at least 40 cm. thread while attaching the stop bead in the first place
You will need it.
When you close the back.
To avoid re-threading, do not forget to reserve at least 40 cm of thread.
And after said this, I show you the pattern repeat interval.
Yes, I think it looks clearly on this schema.
Friends, we made our work including 25. row
And we get this.
Now my thread is out of purple bead on row 25.
Now, instead of going on lines 26-27-28-29-30, I go back to row 14
Because the pattern always repeats the same way.
I do not need to follow the schema in a long manner.
I can keep going on by following just the interval between 14th and 25th rows.
I'm looking at it right now, I have done the 25. row and I'm coming to the 14. row and continue to follow the pattern from here.
Which bead should I get on the 14. row?
1C (bronze bead), 1B (purple bead) and 3 times A (cream bead)
Then I will go to 15. row and make that row.
After that I will go to 16. row and make that row too.
In this way, I will follow the schema from the right and left and continue to 14. row after having finished the 25. row
No changes at all.
The pattern is so easy that you will be memorized it after a while.
Now, what do I do according to the schema?
1C (bronze bead), 1B (purple bead) and 3 times A (cream bead).
I'm continuing from row 14.
1C bead
We are now on the strap.
I take it to the end a little bit.
1B (Purple bead)
1A (Cream bead)
3 times with A bead.
I can easily turn around it because it is short yet.
When it gets longer it will be harder.
then do not turn it, continue by holding steady it.
I made peyote 3 times with A (Cream bead)
Where am I now on the schema?
Now, the 14. row is over,
I'm on the row 15.
On the 15. row, I make peyote 4 times A(cream), 1C (bronze) and 1B (purple) beads.
Continue...
One
Two
Three
and four
I made a peyote with 4A (cream) beads.
Now 1C (bronze)
I make a peyote with 1B (purple) bead.
I described this seam column process in a very detailed way in my previous videos.
I showed you which beads you should go in and out.
Watching those videos will lead you
And I finsihed the row.
Friends, I will continue by following the schema like this.
I will continue making the pattern by following pattern repeat interval.
But before it gets too long, I have to make the closing work at the back and put it on the bottom.
Now, I will show the closing work.
I mean, when we are in this phase, we are going to make the closing work in the direction of stop bead.
We will close the row by decreasing number of beads.
I have shown this in detail in my previous videos.
I will not show you much detail here, but I will make all.
First, we take out the stop bead.
Now, I'm on the bottom of our work.
I left the upper part for a while.
I'm now making the closing part.
Because I keep my work on the bottom and will continue from where I'm standing.
When I close, I run down the needle from a cream bead on the left.
I pass the needle from the bottom of the two beads to the back.
I do this on the strap because I want to close it properly on whole strap width.
If you do not do it on the strap, you will have difficulty putting the strap behind.
And I'm passing my needle down through the purple bead.
Now I continue in line with the schema.
Here I make peyote with 1A (cream) bead.
1B (purple) bead
And I make peyote with 3 times A (cream) beads.
Now, I make peyote upwards with A (cream) beads.
Here instead of Chinese crystal I will continue with the A bead (11/0 cream).
Because it needs to add one or two,
but since the pattern is not completed yet looks ugly.
We can keep those parts with A (cream) beads.
But we continue to make the stripe part according to schema.
Now I make peyote with 1C (bronze) bead.
I am making decreasing work now.
I mean, I'm going down just left of C (bronze) bead,
I pass the needle just below the C (Bronze) and A (cream) beads to the back.
so my thread is going backwards.
and I'm passing my needle down from the C (bronze) bead.
And I keep making peyote.
Here I need to add a Chinese crystal but I do not,
I keep going with A (Cream) beads.
There will be no beads to make peyote anyway.
Then we do decreasing.
I go down from the left of B (purple) bead.
I pass my thread from two B (purple) beads' bottom to back.
And I make peyote with A (cream) bead and continue to decreasing works.
I'm approaching the end now.
Now I am adding 1A (cream) bead. This is my last action.
I'm going in opposite direction of the bead where my thread outs.
I am passing the thread from the last A (Cream) and the bead from the bottom left (cream).
I am joining the last bead.
And I pass my needle from the right A (cream) and top right A (cream).
Closing work is over.
Now I will go through a few rounds of it and push it to the bottom.
Let's knot here, hence it will not loose.
Yes, that is enough.
I will cut it.
I will light it with the lighter and prevent the thread from slipping backwards.
Closing work is done.
And I slide it to the end of the strap.
After that, you make it to a point near that hole ...
by following the pattern and repeat interval.
You will make on the strap and will progress in this way.
I did it this way.
After making 15 butterfly patterns according to this measure...
I mean this 15th butterfly...
after 15th butterfly we make two lines of peyote and then go to closing work.
Let's start with this side of closing.
Actually the same work.
You will make the same closing as the other end.
I go down from the bead on the left A (cream)
We go under the two beads to the back.
We make the same closing work that we did below.
After we've made this, that space will be full.
And our work is complete.
Now I will finish this.
I will close it in the same way.
And let's go to the 'strap loop'.
Yes friends
I did the final phase of the closing work.
I will go through the beads now.
Go through it because this is the moving place of the strap.
Therefore, the thread here will have more deformation.
After a few rounds, you can make a knot on the thread and finish it.
Here, because of Chinese crsytal's different size, these three beads seem to be exposed.
No problem.
Our work is complete.
Yes, we are done.
We can even put it in the last hole.
Now we go to 'strap loop' work.
Yes, now we work on the loop part.
For this, I apply the same pattern on my bracelet.
You see it is the same pattern.
I make a stopper bead for this.
After that
1B (purple), 1C (bronze), 1C (bronze), 1B (purple) beads are arranged on the thread.
4 beads are aligned.
Then I start to make peyote.
1B (purple) bead,
1A (cream) bead
1B (purple) bead
1A (cream) bead
1B (purple) bead
1C (bronze) bead
And so I make the stripe.
Again 1B (purple) bead
You can continue like this by following the schema
I will work until it will reach enough length.
So let's make the work and assembly.
Yes, we made the 'strap loop'
Mine finished at the 36th row.
We can control whether it rounds or not the strap.
I will show you.
The ends should come accross like this.
Now we put it on our bracelet.
I just pass my needle through the purple bead...
and continue with cream bead
I will pull the thread later, no problem.
I pass my needle through the bronze bead above...
and through the purple bead below.
Then entering the purple bead accross in opposite direction.
Now I'm pulling the thread.
Once again I will zigzag to strengthen it.
'Strap loop' was thus completed.
Connecting work is also very easy.
We combine the zigzag with the indentations to match each other.
Then we once again tighten by zigzag through it for not to loose.
I will come after get rid of the thread.
Yes friends, we are done.
we also finished the 'strap loop'.
And that is how we made the work.
You can also make it as a watch band...
Right and Left sides, think the watch itself in the middle.
If you do not have this strap, do not worry,
You can work this round shape.
Using different sizes of beads, you can get different models.
It is also very useful in this respect.
I am looking forward to sharings of your works.
My Instagram account is @bidunyaboncuk_nukhet_demiray
My Facebook account is www.facebook.com/bidunyaboncuk
You can also reach me from these accounts.
I'm really curious.
Let's see how different models you will create?
How creative ideas will come from you?
That is all I have to say in this video.
Stay with love, in good health and friendly. Goodbye.
For more infomation >> Lessons From Linda: Megyn Kelly's Mom Shares Her Advice On Aging | Megyn Kelly TODAY - Duration: 2:17. 
For more infomation >> 3 Outstanding Wordpress Plugins That Will Make Your Website Go Viral - Duration: 3:55. 
For more infomation >> How to use ginger to fight abdominal fat | Natural Health - Duration: 6:02. 
For more infomation >> TOKYO GHOUL abertura - "Unravel" FULL (em português VERSÃO 2018) - Duration: 4:13. 
For more infomation >> ராஜா ராணி செம்பருத்தி (செம்பா) எப்படிப்பட்டவர் தெரியுமா? Everything About Alya Manasa. - Duration: 3:39. 
For more infomation >> "Gömrükdə əməliyyat, generallar işini itirdi, həbslər var","Emin Hüseynova görə izahat istənildi" - Duration: 5:06. 
For more infomation >> ¡Eugenio Derbez preocupado por Adrián Uribe! | Un Nuevo Día | Telemundo - Duration: 3:44. 
For more infomation >> State of Black: Conference planned to celebrate successful African-Americans in the Piedmont-Triad - Duration: 3:48. 
For more infomation >> You Can Translate YouTube Videos Subtitle English to Other Languages! - Duration: 5:14. 
For more infomation >> ¡Ninel Conde se "enamora" de Rafa Amaya! | Un Nuevo Día | Telemundo - Duration: 5:20. 
Không có nhận xét nào:
Đăng nhận xét