Thứ Ba, 4 tháng 4, 2017

Youtube daily Apr 4 2017

IF YOU'RE DRIVING RIGHT NOW,

I-25 SPRINGER INTO RETURN.

THE OTHER BIG WEATHER STORIES

COLD TEMPERATURES.

WE HAVE WIND, SNOW, FOG, PRETTY

MUCH EVERYTHING GOING ON.

30'S AND 40'S ACROSS CHAMA,

ALMOST, AND ESPINOSA.

SANTA FE TOPPING OFF AT 40

DEGREES TODAY ARE.

STAYING DRY IN SOUTHERN NEW

MEXICO FOR MOST OF YOU.

OVERALL THIS AFTERNOON LOOKING

WINDY AND COLD.

IT WILL SLAP YOU RIGHT IN THE

FACE.

BLOWING DUST ALSO POSSIBLE.

LOW VISIBILITY.

54 IN ALBUQUERQUE TODAY.

MUCH COOLER THAN YESTERDAY.

WE ALSO EXPECT A LOT OF WIND.

THE WIND ALREADY BUILDING.

50 MILES PER HOUR IN

ALBUQUERQUE.

CARLSBAD, MORE WIND FOR YOU.

26 MILES PER HOUR SUSTAINED.

YOU EXPECT GUSTS UP TO 60 MASTER

OUT TODAY.

THAT IS DAMAGING WIND.

POWER OUTAGES POSSIBLE INTO

TODAY.

THE PINK AND ORANGE IS WHERE THE

WIND WILL BE WORSE TODAY.

WE MENTIONED THE BLOWING DUST

AND LOW VISIBILITY.

WE WILL HAVE TO KEEP A CLOSE EYE

ON THOSE.

WE HAVE WATCHES, WARNINGS, AND

ADVISORIES GOING ON FOR MUCH OF

THE STATE.

THAT INCLUDES THE METRO AREA.

YOU CAN SEE WHERE UNDER AN

ADVISORY RIGHT NOW IN

ALBUQUERQUE.

GOING TO THE SOUTHEAST COUNTIES,

WE HAVE A WARNING UNTIL EVENING.

HIGH FIRE DANGER CONTINUES.

NO OUTDOOR BURNING FOR YOU.

POLLEN COUNT STILL HIGH.

MOSTLY ON THE EAST OF THE CITY.

For more infomation >> Angela Brauer's Tuesday Forecast - Duration: 1:38.

-------------------------------------------

Csgofast.com not working. How to access csgofast.com if blocked. - Duration: 1:02.

For more infomation >> Csgofast.com not working. How to access csgofast.com if blocked. - Duration: 1:02.

-------------------------------------------

Tuesday: Warm and sunny day, severe storm threat for the evening - Duration: 3:39.

WE ARE GETTING READY FOR ANOTHER

ROUND OF POTENTIALLY SEVERE

WEATHER TONIGHT AND INTO

WEDNESDAY MORNING.

OUR HOTEL CAMERA, WE DO HAVE

SOME FOG OUT THERE TO KICKOFF

THE MORNING.

HERE IS THAT LATEST RADAR.

WE ARE FREE FROM RAINFALL.

WE DO HAVE SOME OFFSHORE SHOWERS

HAPPENING.

WE HAVE SOME REMNANTS AND

INDICATIONS OF THE HEAVY RAIN

YESTERDAY.

THAT'S WHY WE HAVE THESE FLOOD

WARNINGS FOR THOSE RIVERS ABOVE

FLOOD STAGE.

WE ARE LOOKING AT SOME MINOR

FLOODING IN SOME PLACES.

SLIDELL IS CLOSE TO THREE

INCHES.

WE ARE CLOSE TO TWO INCHES IN

KENNER.

IT IS 62 RIGHT NOW AT THE

AIRPORT.

WE WILL SEE THE WIND PICK UP

THROUGHOUT THE AFTERNOON.

WE HAVE SOME 50'S ALONG THE

COAST.

WE HAVE 60'S ALONG LAKE

PONTCHARTRAIN.

THE DIFFERENCE FROM YESTERDAY,

20 THE BREEZE COOLER.

-- 20 DEGREES COOLER.

I MENTIONED THE DENSE FOG.

VISIBILITY IS DOWN TO ONE MILE

FOR GALLIANO.

YESTERDAYS HIGH WAS 81.

TODAY'S RECORD HIGH AS 85.

WE WILL BE CLOSE TO THAT RECORD

THIS AFTERNOON.

TURNING BREEZY AS WELL, YOU WILL

NOTICE INCREASING CLOUDS.

WE ARE RAIN FREE THIS AFTERNOON.

THAT HAPPENS LATER ON TONIGHT.

WE HAVE ISOLATED SEVERE STORMS

POSSIBLE.

THE MAIN WINDOW FROM 11:00 UNTIL

11:00 A.M. TOMORROW.

WE WILL HAVE THE THREAT OF

ISOLATED TORNADOES.

THERE IS A SLIGHT RISK THE NORTH

SHORE THAT GOES DOWN TO NEW

ORLEANS EAST.

WE HAVE A MARGINAL RISK FOR THE

REST OF THE VIEWING AREA.

THERE IS A RISK FOR ANOTHER

ISOLATED TORNADO AND SOME HAIL

AND GUSTY WIND UP.

THIS IS GOING TO TRANSITION AS A

WARM FRONT.

WE HAVE ANOTHER SYSTEM OF LOW

PRESSURE COMING IN.

WE ARE GOING TO SEE THAT WITH

THIS NEXT SET UP.

HERE IS THAT WARM FRONT.

THAT IS LIFTING NORTH.

WE HAVE SUNSHINE THROUGH THE

AFTERNOON.

THIS IS 11:30 P.M.

WE WILL SEE THOSE THUNDERSTORMS

DEVELOP WHICH COULD LEAD TO SOME

ISOLATED TORNADOES POSSIBLY.

WE WILL HAVE TO WATCH THAT

CLOSELY.

THIS INCLUDES COMMUTE TIME.

WE WILL STAY ALERT TO THE

OVERNIGHT HOURS IN MORNING.

11:00, THE COLD FRONT IS ON THE

WAY.

MOST OF THE ACTIVITY IS WRAPPIG

UP I THEN.

IT IS WINDY BEHIND THE FRONT,

COOLING ON THURSDAY AND WE WILL

LOOK AT SUNSHINE AS WELL.

IN TERMS OF RAINFALL POTENTIAL,

MOST SPOTS WILL SEE ONE HALF OF

AN INCH OR LESS.

WE COULD SEE ISOLATED HIGHER

TOTALS WITH THOSE ISOLATED

STORMS.

HIGH TEMPERATURES TODAY, 81 TO

85.

OVERNIGHT, WE HAVE THAT SEVERE

STORM THREAT BETWEEN 65 AND 72.

TURNING WINDY, SECURE ANY ITEMS

THAT ARE LOOSE AROUND YOUR

PATIO.

For more infomation >> Tuesday: Warm and sunny day, severe storm threat for the evening - Duration: 3:39.

-------------------------------------------

Scopriamo insieme le creazioni in resina, gomma e fimo! #1 - Duration: 10:57.

Hello guys, and welcome on my channel, in this new video

Today i will show you my new creations

so we gonna see together this molds, with liquid rubber

then we will see together this resin creations

I didn't craft a lot of resin creations, I prepared only what i need for my polymeric clay craft

and they asre just six molds as you can see

then in the end i wanna show my last polymer clay creation about the beauty and the beast

I recently watched the movie at the cinema

I really like it

well italian dub was not exactly the top for this movie

they did a poor italian adaptation

they choose words completly wrong to translate a lot of expressions

anyway without considering italian dub, I really liked the movie

I watched the english movie and

Trust me if you speak a little bit english, watch it with english original dub

Alright after this long introduction we can finally go with my theme! stay tuned!

Alright! let's start with resin creations. Like i said before they are few and very simple

lets zoom it

I made this scepter of sailor moon

apparently resin is still kinda soft

wow so cute!

it's opaque, but it's not a big deal, i will use uv resin to give "the shining" effect

i am happy i don't see any bubbles

I will use this scepter to create some kind of sailor moon polymer clay creation

then i create this "Chibiusa's Key of Time"

it wasn't my intention, i don't like her at all, to be honest

but i had some spare resin to use and i didn't want to waste it so....

so....Chibiusa it is...

apparently there's no bubbles

wait maybe one, very little one

here on the top

but it's completly invisible

ops sorry

this creations are very thin

I like it

next one, it's my favourite, you already know it

I will create some Card capture sakura creation with polymer clay

this is wow

it's always, wow, this mold, but this time it's even more shiny, because i used so many pink and white glitters.

omg so shiny

i love it, so cute

i wasn't sure how to color this creation...

but at the end i decided to use this transparent color effect

now lets move away this molds

next one, we have to see 3 creations more

this a simple little bunny, nothing special

omg

it's so cute!!!!!!!!!!!!!!!

adorable

I used pink and white irridescent glitters

I love this effect

then i made this card

and it's wow

i can say only wow

look at this..so cute...so shiny

wow

last one

i wanna create a fairy with this cameo

wow

it's opaque

but it's so shiny!!! it's full of glitters

soooooo cute!!!!

i am so in love with it

i love the translucent effect in the center of the cameo

I did it with a thin layer of resin

so cute!!!!

i could use resin uv to do this more shiny

it can be cuter

ok that's all with resin crafts

now we gonna discover this one

what's happened here? what i did ?

these are molds. look how soft they are

I have already removed the pongo clay

let's remove the cutters from the molds

and this one too

i have already cut the contour

ouch

let's start from this one

green color

I create the mold of this mirror

I bought this sailor moon mirror some time ago

you can go watch my old video about

let's see what i have done

wow

let's zoom it

wow, this mold is very good

this was the mirror

very very shiny

i love this mirrors

the mold is rich of details and so shiny

adorable

i cute the contour of the ears

adorable, i wanna test this mold as soon as possible

the next mold is

it's very difficult find a mold of this sailor moon brooch

it's a mirror of the sailor moon stars season brooch, the last one to be specific

sailor moon stars, petali di stelle in italy and so on

what can i say...

wow

i cut some imperfections

to reveal some details

there's wings here in the corners

i am in love with this one too

so shiny!!!

i am using the Fill crystal sil hand 15 liquid rubber

and i am very satisfied about this brand

it get a lot of details as you can see

and if you use a shiny object, the mold will be very shiny

plus you can use a lot of pigment colors, without any bad reaction.

for example for this one i used a dust blue pigment

and for this one I used a green liquid color, generally used for resin craft

if you can, buy this brand (reschimica)

alright now before the end, i wanna show my last polymer clay creation

Like i said before, i recently watched the movie of the beauty and the beast

so i couldn't resist and i crafted something about the movie

more precisely, i am talking about this cameo

I crafted this cameo completely handmade with polymer clay

you could follow the making of the creation on my facebook page or instagram channel

I added this kind of ''tapestry'' on it

no idea how to name this stuff on it

then i sculpt the beast

I had an hard time to create the beast, cause i am not used to realize this kind of ''animals'' or weird creatures

but in the end i like it

then i realized Belle with her new dress movie version

if you remember the old disney dress cartoon was completly diferent

and then i realized the rose

I like the final result

so cute

here in the center i added a little red gem

this is not a swarosky, kinda similar but it's not

i am happy

I even added a gold effect on the belle's dress

i hope you like it as well

because i like the final result

And for today that's all!

we watched together some resin creations, some new molds and a polymer clay creation

i hope you enjoyed this video

if you like it please subscribe on my youtube channel

like it

for any questions ,leave a comment below

stay tuned and see you on my next video! byeeee

For more infomation >> Scopriamo insieme le creazioni in resina, gomma e fimo! #1 - Duration: 10:57.

-------------------------------------------

Consumer Groups: Consumer Lawyers Are Now Targeted For Prosecution - Duration: 4:42.

We've all heard the worn-out jokes about lawyers coming from comedians and politicians,

and even our friends.

They refer to lawyers as opportunistic ambulance chasers who are only out to make a quick buck

off of someone else's suffering.

These comments aren't as innocuous as you might think.

In fact, they're focused and developed as a highly financed, well-coordinated, decades-long

smear campaign carried out by business interest groups like the U.S. Chamber of Commerce and

the world's biggest insurance corporations.

In 1971, Lewis Powell, before he became a justice on the United States Supreme Court,

sent a memo to business and political leaders, where he outlined what he believed were the

challenges facing the business community, coming from a group that he referred to as

the New Leftists.

During Powell's entire career, as a matter of fact, as a lawyer and as a judge, he was

a loyal, loyal servant to a system where the interest of corporations was always superior

to the interest of consumers who were victimized by those corporations.

In this memo, Powell suggested that business groups, specifically the U.S. Chamber of Commerce,

needed to come forward with direct campaigns in the media and by lobbying politicians to

paint anti-corporatist groups like trial lawyers and consumer groups as enemies of democracy

who are only out to serve themselves.

By the 1980s, the campaign was well underway, and the U.S. Chamber of Commerce and the insurance

industry was leading the charge to discredit and dehumanize and vilify trial lawyers

because they were the only ones holding corporations accountable when they killed or crippled American

consumers with defective products.

Sadly, the public was willing to buy into those lies.

The Chamber of Commerce created a new department that they called the Institute for Legal Reform.

This group was created to be the attack dog of big business and Republicans.

Their only job was to go after trial lawyers for two reasons.

The first reason was because businesses didn't want to pay for their crimes.

The second is because, at the time, trial lawyers were the largest donor group for the

Democratic Party, a trend that's only ended once Citizens United allowed Wall Street bankers

to buy the loyalty of the Democrats.

Once the Chamber and their allies in the political world smeared the image of trial lawyers as

a whole, they began to target specific attorneys and law firms.

In a report issued by the Institute for Legal Reform in October of 2013, the group specifically

listed law firms and individual lawyers who they believed posed the biggest threats to

the profits, the profits of big business.

The attacks from corporate interest groups and politicians took a sinister turn.

In the last few years, they've provided just a small glimpse of what corporations

really want to accomplish, and that is putting consumer trial lawyers behind bars.

That leaves government regulatory agencies as dysfunctional

as the FDA, as dysfunctional as the SEC and the EPA, to keep their eye on corporations

and try to keep corporations honest.

Then, of course, there's America's corporate media that today is fully owned and operated

by huge corporate advertisers who threaten to pull billions of dollars in advertising

from ABC and CBS and NBC if those corporate media types go too far in protecting consumers

against corrupt corporations.

For more infomation >> Consumer Groups: Consumer Lawyers Are Now Targeted For Prosecution - Duration: 4:42.

-------------------------------------------

North Country law enforcement attend autism response training - Duration: 1:54.

STORY

TONIGHT.

LIZ: WALKING INTO A ROOM FULL OF

PEOPLE CAN BE HIGH STRESS

SCENARIO FOR SOMEONE WITH

AUTISM.

>> HE HAS LIMITED SPEECH.

LIZ: THAT IS WHAT THE IT

WILL-YEAR-OLD HUNTER DID ON

MONDAY.

HUNTER IS NONVERBAL ON THE

SEVERE SIDE OF AUTISM SPECTRUM.

HE IS VISITING THE DANNEMORA

COMMUNITY CENTER TO SPEECH LOCAL

LAW ENFORCEMENT HOW TO COMMUNITY

WITH OTHERS SUCH AS HIM.

>> HIS MOTHER HAS VOLUNTEERED

THAT BEFORE HE HAS A MELTDOWN,

SHE CAN HELP.

>> STEHPANIE RUNS THE RESPONSE

RAINING AND TRAVELS AROUND THE

COUNTRY TO REDUCE THE STIGMA

BETWEEN LAW ENFORCEMENT AND

PEOPLE LIVING WITH AUTISM.

FOR HER, IT IS MUCH MORE THAN

JUST A JOB.

>> I WAS AN OFFICER IN NEW

ORLEANS AND I LIVE NOW IN

ORLANDO AND MY SON GO TO A

SPECIAL CHARTER SCHOOL FOR

AUTISM.

>> PEOPLE WITH AUTISM ARE MORE

LIKELY TO BE ABUSED OR KIDNAPPED

AND WANDER OFF.

WHEN THEY HAVE TO ENGAGE WITH

LAW ENFORCEMENT THEY CAN

SOMETIMES SHUT DOWN.

COOPER'S SOLUTION WAS AUTISM

SENSORY KITS.

EVERY OFFICER GETS ONE FOR FREE.

INSIDER NONVERBAL COMMUNICATION

CARDS.

>> IT HELPS THEMMEN WITH IT

COMES TO INTERVIEWING AN

INDIVIDUAL WITH AUTISM.

>> A CUE STICK.

A THERAPY BRUSH.

A FIDGET CUTE.

ALL TRAINING WAS A GREAT WAY TO

LEARN.

>> WE HAVE SEEN PEOPLE TODAY WHO

DRIVE AND HAVE AUTISM AND THOSE

WHO ARE NONVERBAL SO A LARGE

SPECTRUM.

IT IS HELPFUL TO KNOW HOW TO

INTERACT.

>> OFFICERS AND PEOPLE LIKE

HUNTER STEP OUT OF THEIR COMFORT

ZONE LEARNING HOW COMMUNICATE

For more infomation >> North Country law enforcement attend autism response training - Duration: 1:54.

-------------------------------------------

French Music in French Cafe: Best of French Cafe Music (Vintage French Cafe Music Vintage Jazz) - Duration: 3:39:04.

For you and your enjoyment: French Music in French Cafe: Best of French Cafe Music (Vintage French Cafe Music Vintage Jazz)

For more infomation >> French Music in French Cafe: Best of French Cafe Music (Vintage French Cafe Music Vintage Jazz) - Duration: 3:39:04.

-------------------------------------------

Top 5 Worst Dungeons from Final Fantasy XIV: A Realm Reborn - Duration: 9:29.

Hello Eorzeans!

We're back with another top list!

Let's first of all be perfectly clear: this is just the opinions of Speakers of Hydaelyn,

and everyone is different so naturally, people have different looking lists!

Last time we looked at the top 10 best dungeons from A Realm Reborn.

Today we're gonna look at the top 5 worst dungeons.

The same basic criteria applies here, so the ones with the lowest scores here, gets the

first spot.

Well, without any further ado, let's take a look at Speakers of Hydaelyn's Top 5 Worst

Dungeons from A Realm Reborn.

-NUMBER 5- Amdapor Keep (Hard).

Starting off this list we have the hard mode of Amdapor Keep.

This dungeon is on this list primarily because of its terrible pacing and gating.

The music is slow and dull, and is comparable to Snowcloak's sleep inducing theme.

Although the speakers are all torn on this specific dungeon, we all agree that the design

is basically a washed out version of Amdapor Keep.

The monster variety is lacking, mostly consisting of bugs and trees, and the bosses, even if

they have some new mechanics, are generally uninteresting and not particularly fun to

play.

Only exception being the room before the last boss as well as the last boss itself, which

actually does introduce a number of new mechanics.

-NUMBER 4- Dzemael Darkhold

Here's one that we're pretty sure people will agree with.

Dzemael Darkhold is one of those dungeons that makes you go *SIIIIIIIIGH* whenever it

pops in your roulette.

And there is a reason for that.

The dungeon is riddled with horrible gating in form of Magitek circles that players must

stand in – and wait for it to count down before the door opens!

- Fun times.

The design of the dungeon is quite basic, being just a dark musty cave with some crystals

sticking out of the walls.

The music at the beginning is somewhat interesting but it cuts out after a minute, leaving you

to complete silence when not engaged in combat, and once you enter combat, you are presented

with the generic dungeon battle theme.

All of this makes the dungeon plain…

Boring.

The bosses in Dzemael is what pulls it up a bit, as they are pretty quick to kill and

has at least a couple of interesting mechanics.

Big plus for being easy to speedrun, so you can get out of that crystal hell pretty quick.

-NUMBER 3- The Tam-Tara Deepcroft

This dungeon's Hard Mode captured our Top 10 Best Dungeons list's 2nd place, but man,

what a massive difference there is between these two dungeons.

The Tam-Tara Deepcroft is a short dungeon that has very little going on inside.

Just like all other A Realm Reborn dungeons, it has no actual theme playing throughout,

except for a short sample at the very beginning, automatically putting you into "bored"

mode.

The bosses won't help this dungeon out either, as they are just the same bosses over and

over again with slightly more adds each time.

The last boss has one mechanic involving a tethered add.

Which is actually fine, because this is supposed to be a "tutorial dungeon", learning mechanics

is fine.

But the fact that this is the only actual boss in the entire dungeon is both sad and

disappointing.

Plus points for having some optional routes, promoting exploration, even if the dungeon

is a bit bland.

-NUMBER 2- Copperbell Mines

This dungeon gets the number 2 spot for being plain boring.

The bosses are boring, the mobs are boring and the design is boring.

The dungeon is short on paper, but the artificial gating and mob clusters makes it feel like

it takes waaay too long.

And of course, no music.

I know I know, it's getting old, but it makes a world of difference to have a unique

soundtrack to go with a dungeon, as it's part of its identity.

Sadly, because Copperbell Mines uses the generic battle theme, it falls into the "generic"

category.

The monster variety is also pretty bland, mostly consisting of Spriggans, elemental

sprites, Coblyns and Hecatoncheirs, which doesn't exactly make this dungeon any better.

The bosses are incredibly basic, perhaps with the exception of the second boss which is

just an infuriating mess if your party members don't understand what to do.

Being one of the first dungeons you encounter in the game, it's a shame it's this boring.

Before we get to the number one spot, here are a couple of honorable mentions for dungeons

that just barely missed a spot on the list.

The Aurum Vale I bet most of you thought this would be number

one.

Hey guys, it's not.

The Aurum Vale is actually a pretty unique and interesting dungeon – but we all know

why this dungeon is also a nightmare.

The first room is just a cluster of annoying mobs, including toads with their disgusting

tongues, bogeys that attack you from a range that is a nightmare to tank and saplings which

are JUST as annoying.

The first and second boss is a carbon copy of each other, only difference being one extra

mechanic.

However it gets plus points for being a challenging dungeon, being the first dungeon new players

encounter that gives them a taste of what endgame is going to be like.

Lots of wipes.

The Stone Vigil – This dungeon feels too long.

With what feels like endless amounts of mobs everywhere.

It also has an annoying dragon that randomly peeks down from the ceiling and damages the

party, which just further infuriates the players.

The dungeon has a good design overall, but it does feel like it just never ends.

The dungeon is however incredibly good to run for exp at its level range, so just pop

up Netflix and grind that shit.

Cutter's Cry – The definition of bland.

Starting off with a color palette consisting of 4 shades of brown.

And to top it all off, the length is dragged out through these shifting sands gates that

only activates if all mobs in a room is killed.

Sure, you might enjoy it somewhat the first time.

Have fun doing that again and again for exp.

The dungeon does get plus points for evolving into something better looking towards the

end, and of course: because it's the home of the iconic Chimera!

Now let's get into our number one spot on our list

-NUMBER 1- The Thousand Maws of Toto-Rak

There was no doubt, this score is way below the number two spot.

The Thousand Maws of Toto-Rak ticks all the boxes for a bad dungeon.

This dungeon feels like an eternity in hell.

It has several gates that must be opened by looking for photocells that can be obtained

in the dungeon and by killing mobs.

There are also some areas that has these cobweb doors that sucks you in, and then closes the

web behind you, leaving any party members that are too slow, on the other side.

So you'll have to spend time destroying that web to let the other members in.

The mobs are just diremites, ochus, pterocs and the odd sapling, and it never changes

except for a few puddings along the way.

To make the dungeon even worse it has branching paths that don't actually lead anywhere,

and the ground is often covered in this green goo that gives you heavy – dragging out

the length of the dungeon even more.

Just to make it all even more infuriating, they have these… things that explode when

you get near them, giving you poison that actually stacks.

So you're forced to either have your healer esuna every one, or having to shield lob or

range attack every single one you see before you can proceed.

The bosses are just two ochus and a diremite.

The same mobs you've been fighting throughout the entire dungeon.

The design of the dungeon is dark and mossy, with very little light and is mostly just

depressing – the dungeon also doesn't have any unique music other than a 60 second

sample at the very beginning that sounds just as depressing as the dungeon looks.

What a surprise.

Sorry Toto-Rak, you're terrible.

That's our Top 5 worst dungeons from A Realm Reborn.

Do you agree with this list?

Do you disagree?

Most likely, so let us know your top 5 worst dungeons in the comments below!

We have released the full score document in the description below for you to enjoy and

read our individual scores and explanations!

In our next top 10 video, we'll be tackling the Trials from A Realm Reborn!

Remember to subscribe for more and leave a like if you enjoyed!

See you in the next one!

For more infomation >> Top 5 Worst Dungeons from Final Fantasy XIV: A Realm Reborn - Duration: 9:29.

-------------------------------------------

Hướng dẫn làm khung thách đấu lúc tải trận cho mọi rank mới nhất 2017 | Kidding Zed - Duration: 2:02.

For more infomation >> Hướng dẫn làm khung thách đấu lúc tải trận cho mọi rank mới nhất 2017 | Kidding Zed - Duration: 2:02.

-------------------------------------------

Taiwanese Cultural Festival | TOMB SWEEPING DAY 清明節掃墓 - Duration: 4:07.

So Tomb Sweeping Day

is on the 4th of April

and it is a holiday

we actually take a day off

aka long weekend

um

and what do we do on Tomb Sweeping Day?

because it sounds pretty unfamiliar

but it is actually a day I grew up with

since I have memory

and we literally just sweep the tomb

Tomb sweeping is actually a very traditional Taiwanese culture

that we have this custom

We visit our ancestor's tomb

about once a year

and

I know

It sounds pretty depressing

visiting a tomb

but

In Taiwan, well at least in my family

we kind of treat it as a field trip day

for all the families and extended families

the family we don't see very often

to get together and bring foods

I guess it's kind of like a potluck

but at a tomb

and we do labour works

This man's mother caught an illness

I forgot his name

Anyway his mother was ill

The doctor had given him a prescription to get deer milk

Ohh so she could drink it to heal the illness

Yes but how is he going to collect deer milk?

He then wore a sheet of deer skin

He wore this so he could blend in and collect deer milk

then there came a hunter

The hunter almost accidentally shot him mistakenly thinking him for a deer

Then the man quickly stood up and the hunter realized he was a person

The hunter was curious and inquired why he did such a thing

And this is one of the "24 Filial Piety Stories" in Confucian philosophy

fancy

I think this is the newer edition

Cool! There're prints now

floral print

FLORAL PRINT

So my cousin is actually

going to tell us why

we have these tomb papers

that are nailed down on the tomb with a rock

So there was a general

whose tomb was destroyed

during the war

and he used the paper

to locate his tomb

with the help of the Gods

and it becomes today that

we use these papers to decorate our tombs

The speciality food we eat on Tomb Sweeping Day

is called the caozaiguo

and it comes in a variation

from sweet which would be represented as red

and the green is vegetarian

and usually wrapped in

the sweet would be red bean

and the green would be pickled raddish

The origin of why we crack a hard boiled egg

onto the tomb is that

it symbolizes the cycle of life

and the becoming of a new life

another religious belief in Taoism

is that when you burn all these ghost money

the ashes and the smoke would go up in the air

and our ancestors in heaven

would receive them

These Gods were crossing this ocean to get to a party

They each wanted to show off their powers

to see who was more capable of crossing this vast ocean

Ohhhh realllyyyy?

So they each came up with the coolest thing

There was God who rode on a sea turtle

Some on deers; some on flying animals

There was also a God who crossed the ocean via Chinese flute playing

Now the tomb's cleaned

and that's my cousin

I think mission accomplished

we're ready to head home

For more infomation >> Taiwanese Cultural Festival | TOMB SWEEPING DAY 清明節掃墓 - Duration: 4:07.

-------------------------------------------

The RevShare of RevShares 💝💰💝💰💝 Take a moment to see and understand - Duration: 2:08.

For more infomation >> The RevShare of RevShares 💝💰💝💰💝 Take a moment to see and understand - Duration: 2:08.

-------------------------------------------

316009046 Replacing Your Kenmore Range's Burner Control Knob - AP4374334, 1513291, PS2350720 - Duration: 1:26.

Hi, I'm Mike and today we're going to be replacing the knob on your Kenmore range model.

The reason why you would be changing out the knob is if you're missing a knob or the knob that

you currently have has a broken shaft.

If you need a new OEM replacement knob, you can find one on our online store.

So, our range is actually missing a knob and we're going to replace it with our new knob

right here.

In order to place our new knob onto the range, we're going to make sure that the shaft of

the knob, matches up with the switch on the range.

You can see that it kind of has an upside down smile on both the switch and the knob.

You're just going to take the knob and slide it onto the switch, give it a few turns to

make sure its on there securely.

Once you notice its on secure, you're repair is complete.

Thanks for watching our video.

Please, like, comment or share.

If you liked our video, please subscribe to our channel.

For more infomation >> 316009046 Replacing Your Kenmore Range's Burner Control Knob - AP4374334, 1513291, PS2350720 - Duration: 1:26.

-------------------------------------------

W10872845 - Replacing Your Whirlpool Dishwasher's Filter Cup-AP6030094, 8579307, PS11759673 - Duration: 1:41.

First we are going to open up the dishwasher door and next we are going to slide the lower

dishrack out and then we are going to remove that lower dishrack so once the lower dishrack

has been removed your filter cup is going to be located right here and you may have

to move your lower spray arm in order to access the filter cup and to remove our filter cup

all we are going to need to do it just pull up you may have to twist depending on your

model next grab your new OEM replacement filter cap if you do not have one of these filters

already you can find one on our online store and all we are going to do with our new filter

cap is make sure that it is locked into place on the bottom of the dishwasher and you are

going to twist it until it locks and once you have checked to see that the filter cap

is secure you can go ahead and replace the lower dishrack and we are just going to put

the dishrack in position and slide it back into the dishwasher and after that you can

go ahead and close the dishwasher door and your repair is complete thanks for watching

our video please like, comment, or share, and if you liked our video please subscribe

down below

For more infomation >> W10872845 - Replacing Your Whirlpool Dishwasher's Filter Cup-AP6030094, 8579307, PS11759673 - Duration: 1:41.

-------------------------------------------

WPW10463906 - Replacing Your Whirlpool Dishwasher Screen- W10463906, W10195360, WPW10195360 - Duration: 2:12.

First we're going to open up the dishwasher door and next we're going to slide the lower

dish rack out.

Then we're going to remove that lower dish rack.

So once the lower dish rack has been removed our dish washer screen is going to be located

right here underneath the spray arm.

What we're going to do first is remove the spray arm, by just twisting the nut that the

spray arm is on and just remove the spray arm.

Next we're going to remove the filter cap by just twisting it out of position and pulling

up, and the screen is going to be located underneath that filter cup.

We're just going to pull up and remove it out of the dishwasher.

Next grab your new OEM replacement dishwasher screen.

If you don't have one of these screens already, you can find one on one of our online stores.

I'm going to take the new screen, and make sure it slides into position correctly on

the dishwasher, we're just going to make sure it doesn't move.

After we see that it's secure in the dishwasher, we're going to go ahead and replace the filter

cup.

Next we're going to replace the spray arm again.

Once the spray arm is in position and it's secure, next we're going to replace the lower

dish rack.

We're just going to put the dish rack in position and slide it back into the dishwasher.

After that you can go ahead and close the dishwasher door and your repair is complete.

Thanks for watching our video, please like, comment, or share.

If you liked our video please subscribe down below.

For more infomation >> WPW10463906 - Replacing Your Whirlpool Dishwasher Screen- W10463906, W10195360, WPW10195360 - Duration: 2:12.

-------------------------------------------

WPW10348269 Replacing Your Whirlpool Dishwasher's Drain Pump-W10084573, W10158351, W10348269 - Duration: 2:48.

Hi I'm Mike.

You may need to replace the drain pump on your dishwasher, if you notice that the water

inside the dishwasher isn't draining correctly, or is leaving excess water after a cycle,

or if your dishwasher isn't cleaning your dishes properly.

Before we begin our repair on our dishwasher we're going to make sure that the fuse is

turned off that's connected to the dishwasher, we're going to disconnect any hoses, and for

some repairs you're also going to have to remove the bottom kick plate of the dishwasher.

Let's begin our repair.

We're going to take our dishwasher and we're going to put it on its side This way you can

get to the bottom frames of the dishwasher so we can install our new part.

So the first step in removing the drain pump is we're going to disconnect this wire harness

from the pump.

You may need a flat head screwdriver, and we're just going to push down on the tab,

and pull the wire out.

And next we're going to push down on this grey tab right here.

This tab locks the pump into the pump assembly.

We're just going to push down, and we're going to turn it counterclockwise, and then pull

the pump out.

Next grab your new OEM repair replacement drain pump, if you don;t have one of these

pumps already you can find one on one of our online stores.

Also take notice that the pump may be different in color but that's due to the manufacturer

changing a few things in the motor, it will still work in the model.

So next we're going to make sure that this tab is going to lock into the drain pump assembly

correctly, so we're going to place that like so, this way when we twist the motor in position,

it will lock.

Once you hear that clicking noise, and the pump will stay in position, you can go ahead

and reattach the wire harness back into the pump.

Once you reattach the bottom plate of the dishwasher that you took off previously your

repair is complete.

Once the dish washer is standing up straight, we're going to place it back into the cabinet,

and we're going to do that by putting it into position, reattaching the fill and drain hoses,

and then you're going to screw in the dishwasher into the top of the cabinet.

After that you're going to turn on your water, and your repair is complete.

Thanks for watching our video, please like, comment, or share, and if you liked our video,

please subscribe down below.

For more infomation >> WPW10348269 Replacing Your Whirlpool Dishwasher's Drain Pump-W10084573, W10158351, W10348269 - Duration: 2:48.

-------------------------------------------

Top 10 FIRST Products of FAMOUS Companies - Duration: 8:41.

Top 10 FIRST Products of FAMOUS

Companies

10.

Ford Quadricycle, 1896.

This Granddaddy of all Fords had a 2 cylinder 4 horsepower motor, could seat 2 and rode

on bicycle tires.

Steering was accomplished by a "tiller" (stick type thing) instead of a steering wheel,

and top speed was 20 mph.

Ford was 32 years old when he built his first Quadricycle.

Ford Motor Company today makes around 5.5 million vehicles per year and brings in revenue

of about $144 billion!

9.

Boeing Model 1/ B&W Seaplane, 1916.

The first of an airplane lineage that boasts a line of American bombers with no equal and

a line of American airliners that sets the standard of the world.

This primitive pontoon float plane had a motor that produced 125 horsepower that could take

it to a speed of 75 mph.

Only 2 were built, named Bluebill and Mallard (both types of ducks), and were sold to New

Zealand.

Boeing would go on to make the B-17 Flying Fortress, B-29 Superfortress, B-47 Stratojet,

and B-52 Stratofortress for the US Air Force (and Army Air Force).

Boeing would also go on to make iconic airliners such as the 727, 737 (most produced airliner

in history, over 8400 built and still in production), 747, 757, 767, 777 (world's largest 2 engine

jet), and the 787 Dreamliner.

They also make helicopters and other products.

8.

Volcanic Rifle, 1855.

This innovative firearm is the grandfather of all the Smith & Wesson and Winchester guns

to follow.

Smith and Wesson started the Volcanic Repeating Arms Company in 1855 to manufacture and sell

a lever action repeating rifle using new "Rocket Ball" ammunition (see #7).

The partners sold out to Oliver Winchester and the Winchester line of guns and ammo was

born.

Smith and Wesson later got back together in 1856 under the S&W banner and proceeded to

make the first bored through cylinder metallic cartridge revolvers.

The S&W Model 1 (how apropos!) used a rimfire .22 caliber round (now known as .22 Short),

and became the progenitor of all those great S&W revolvers to follow.

(Of course, S&W also developed many other rifles and pistols as well as ammunition.)

7.

Rocket Ball Ammunition, 1848.

The first practical self contained cartridge, the Rocket Ball consisted of a hollow lead

bullet filled with gunpowder and closed off at the back by a metal cup with a hole in

the middle and then developed as the Volcanic Cartridge with the primer attached.

This early form of caseless (no brass shell) ammo was used in both single shot breech loading

guns and the earliest lever action rifles.

This is the earliest example of what came to be developed as our modern cartridges that

consist of a brass (or other metal) shell filled with powder, a bullet seated at the

front, and either priming powder around the inside of the rim (rimfire) or a primer in

the center rear of the shell casing.

The Rocket Ball was grossly underpowered due to a lack of sufficient powder capacity.

Modern efforts to produce effective caseless ammunition continue, and sooner or later will

be the norm.

Rocket Ball can be considered the first ammunition product in the long line of Winchester Ammunition.

6.

Altair Basic, 1975.

The first product produced by Microsoft, this was an "interpreter" for a computer called

Altair 8800 made by MITS.

Bill Gates and his partner Paul Allen formed Microsoft to produce the Altair BASIC, and

the rest is all those software programs and computer products history.

Microsoft has an annual revenue of over $86 billion and employees over 128,000 people,

all starting with their first product.

Bill Gates is the richest man in the world, worth $82 billion, while Allen is ranked as

the 51st richest man with over $17 billion.

5.

Wham-O Slingshot, 1948.

This wooden handled sling shot was the first product of Wham-O Toys, originally built in

the garage of the founders, a pair of under-employed graduates of USC.

Showing off their skill with the powerful weapon/toy to market their product, Wham-O

went on to buy the rights to market the Hula-Hoop, and later came up with the Frisbee, the Super

Ball, and the Slip 'N' Slide.

Wham-O is now owned by the Aguilar Group after being owned by toy giant, Mattel from 1994-1997.

In 1958 and 1959, a total of 100 million Hula-Hoops were sold!

Other goofy products have included plastic shark teeth (to take advantage of the 1975

movie, Jaws), Silly String, Monster Magnet, Wheelie Bar (for bicycles), Super Stuff, Hacky

Sack, Magic Sand, Boogie Board and Instant Fish.

4.

Banking, 1883.

The first of a staggering 1800 games produced by Parker Brothers, a game manufacturer, notable

classics such as Rook (card game 1906), Sorry (1934), Monopoly (1935), Clue (1949), and

Risk (1959).

They even made video games such as Frogger.

The company was eventually acquired by Hasbro in 1991, and in 2013 Hasbro deleted the Parker

Brothers name from the games.

PB also published children's books featuring Strawberry Shortcake and the Care Bears.

3.

Veg-O-Matic, 1964.

Invented by his father, Samuel Popeil, Ron Popeil started selling this and other daddy

invented stuff under the name Ronco, his own company.

Ron Popeil became the first of the famous television pitch men selling gadgets on infomercials,

bringing phrases to the American lexicon such as "Set it and forget it," "But wait,

there's more!" and "As Seen on TV."

The Pocket Fisherman, Dial-A-Matic, Showtime Rotisserie and BBQ, 5 in 1 Turkey Fryer & Food

Cooking System are examples of these television products we have watched him so enthusiastically

sell.

Ron Popeil has often been parodied on cartoons and television shows, including Saturday Night

Live.

2.

Industrial Pigments, 1885.

Before Crayola became synonymous with "crayons" they were a company called Binney & Smith

that sold industrial pigments.

Crayons were added to the product list in 1903, and the first dustless variety of white

chalk in 1904.

The Crayola name was invented by the wife of co-founder Edwin Binney, and the "ola"

part of the name became a popular suffix for all sorts of products.

Crayola Crayons were inducted into the National Toy Hall of Fame in 1998, and the company

changed its name to Crayola in 2007.

The wonderful box of 64 different colored crayons was my Holy Grail throughout my elementary

school years, but alas, I never was one of the lucky kids that had one!

Crayola has had the rights to Silly Putty since 1977, and makes a variety of colored

pens, pencils, markers and art materials.

1.

Corundum and Sand Paper, 1902.

3M, famous for making Scotch Brand tapes of all sorts, started out as Minnesota Mining

and Manufacturing, attempting to mine corundum.

Failing at that, they quickly switched to sand paper and after struggling found success

after several years.

Their famous Scotch Tape, introduced in 1930 is their best known product, but they make

and have made a tremendous variety of things, from grinding wheels to tape player/recorders,

adhesives, abrasives, Post-It notes, photographic film, data storage, car care products (such

as Meguiar's, Bondo, etc), and pharmaceuticals.

Products such as Scotchgard and Scotch-Brite are household names, and the list goes on

for an amazing amount and variety

of products.

For more infomation >> Top 10 FIRST Products of FAMOUS Companies - Duration: 8:41.

-------------------------------------------

WPW10491331-Replacing Your Whirlpool Dish Washer's Lower Spray Arm-AP6022259, PS11755592, 2312843 - Duration: 1:35.

First we are going to open up the dishwasher door next we are going to slid the lower dishrack

out and then we are going to remove that lower dishrack so once the lower dishrack has been

removed our spray arm is going to be located right here and to remove the spray are all

we are going to do is just twist on this nut right here pick it up and remove it next grab

your new OEM replacement spray arm if you do not have one of these spray arms already

you can find one on our online store to install our new spray arm we are just going to latch

the new spray arm onto that opening and we are just going to twist the nut until it locks

and we are going to check to make sure our dish arm is spinning once you have checked

that your spray arm is secure you can go ahead and replace the lower dishrack and after that

you can go ahead and close the dishwasher door and your repair is complete thanks for

watching our video please like, comment, or share, and if you liked our video please subscribe

down below

For more infomation >> WPW10491331-Replacing Your Whirlpool Dish Washer's Lower Spray Arm-AP6022259, PS11755592, 2312843 - Duration: 1:35.

-------------------------------------------

Powerful Panel Discussion Tip #95 with Glenn Thayer: Using Technology During a Panel Discussion - Duration: 2:13.

Glenn, how do you use technology to stimulate audience participation?

There's a couple of different ways to do it.

I mean, I've used joint speaker.

Then I've used poll everywhere.

Really the way to set it up is let them have fun with the technology first.

I mean it's usually a relief to tell everybody to pull out their smartphones, turn it on

and hold it up over their head and now you've got a sea of lights going out which is always

an amusing little shot that people can get but then I have them go to the website.

I have them go here's how it is.

I run them through a tutorial but I make it fun.

You know, we might have a question, my favorite question is, "If you can have a superpower,

what would it be?"

And we do it as a poll.

So we set it up so we can get some information and the panel members can get some information

so it's like what's your favorite superpower?

I borrowed that from Jeff Hurt because he always uses that one.

I said, "What's your favorite superpower?" and on the poll it's x-ray vision, fly,

be invisible and then the last one is, "I don't need superpowers, I'm a ninja."

That's what I always add into it.

The IT guys almost always go to the ninja I find.

But we do that, we find out who's the ninja, who else and then I might throw out something

else, "Who else have something else out here that wants to have a different superpower?"

And people raise their hands and just shout things out.

So we kind of have fun with it.

And then we go back in and say, "Let's start entering in some of the questions.

Here's where the questions go in?"

And I might have a tutorial that is up to the screen behind me or to the sides.

And we just kind of walk through it so they get the chance to be able to see it, test

your questions out, here's where it is.

The software will tell you and since they're mobile websites, it makes it easy to be accessible

from any of the smartphones or their iPads or laptops if they have those in the room.

For more infomation >> Powerful Panel Discussion Tip #95 with Glenn Thayer: Using Technology During a Panel Discussion - Duration: 2:13.

-------------------------------------------

WPW10544004-Replacing Your Whirlpool Dishwasher's Door Strike-AP6022786, PS11756123, 3021614 - Duration: 1:40.

To begin our repair we are just going to open up our dishwasher door and the lid strike

is actually going to be this metal tab that is sticking out of the dishwasher it is going

to be located on the top of the frame of the dishwasher you will have to remove your dishwasher

out of your cupboard or any area where it is enclosed to remove the lid strike all we

are going to do is just using our hand just push and pop the lid strike out next grab

your new OEM replacement door strike if you do not have one of these door strikes already

you can find one on one of our online stores to install your new lid strike your just going

to make sure that this tab is facing downwards and we are just going to slide it into position

on that top frame you should here a click and that means the door strike is secure on

the top of the frame next we are going to shut the dishwasher door and we are going

to make sure it stays securely shut and once you notice that the door stays securely shut

your repair is complete thanks for watching our video please like, comment, or share,

and if you liked our video please subscribe down below

Không có nhận xét nào:

Đăng nhận xét