bangladesh news 24
Đăng ký:
Đăng Nhận xét (Atom)
-------------------------------------------
JJ Abrams to direct Star Wars Episode 9 - Duration: 6:36.
Wow, so we have our Colin Trevorrow replacement
for Star Wars Episode 9
and JJ Abrams is back!
-------------------------------------------
3 Ways to Sync Your Strobes to Your Camera - Duration: 8:02.
You just bought Strobes and now you need to know how to sync them with your camera.
Here's how.
Hi, this is Jay P. Morgan.
Today on "The Slanted Lens," we're gonna talk about how to sync your camera with your strobes.
There's three basic ways we're gonna talk about today.
These are the three that I think are the most practical.
There is a myriad of ways to make this happen all because of DIY kinds of tricks and workarounds.
But we're gonna talk about the three basic ways to sync your camera with your strobes.
So, number one.
It's the easiest and probably the most effective with regards to not failing way to sync your
strobes with your camera, is just simply the cable that came with your strobe.
Or you can purchase these at B&H or through the RMS affiliate program.
These are simply a sync.
The sync goes on the side of the camera right here and now you simply run this all the way
over to your strobe.
And now when I take a picture, it syncs.
The pros are it's extremely reliable.
It's the most reliable way to fire your strobes.
The cons are that your strobe can only go as far away from your camera as this cable.
And then this cable lays on the ground and you've got people tripping on it, and it's
kind of a pain in the butt.
And it's very difficult because you can only fire one strobe with it.
Only one.
So, number two is using the electronic slaves that are on most strobe heads that are made
today.
So, this power pack here has an electronic slave on the top of fit, and you can put this
over to the slave.
And this one over to the slave and this one to the slave.
And what it's doing is if it gets a flash of light, that light is collected in this
little slave here.
And it sees the light and it goes, "Oh, there's a flash."
And so it flashes the unit that it's connected to.
So right now I have my cable to one.
When it goes off, it's going to reflect in the electronic eye of the other two and it's
gonna fire all three.
Here we go.
And there they go, all three went off.
So now that's slave mode.
But we're still connected to this cable.
So what we can do is get rid of this.
We're going to now add a strobe to the camera.
And we're going to use this to fire the other strobes in our shot.
I'm running this on manual because I do not want this to overpower the work that these
other three are doing.
My goal is that these three are my lighting and this just becomes the trigger that sets
my camera.
Now the pro of this situation is, what really is positive about this, is that I can get
this as far away from my set as I want.
And I can fire it off.
The negative or the downside of this is that it does bring the light up on set.
So that can be sometimes hard to balance and be able to fight with.
And, secondly, is that it's gotta be fairly close.
It won't fire these in the light outside.
Outside in the bright light becomes the most difficult place to use slaves because the
slaves can't see a change in light because it's already so bright out there.
They don't respond to that.
So, they need a darker area.
Great inside, great on set, great when you're working in somebody's house but not great
when you're working outside.
So, number three.
So I'm kind of a radio slave.
There's a lot of companies that make these.
There's Radio Poppers or Pocket Wizards.
There's [inaudible 00:03:16], you know.
There's all kinds of stuff out there I'm sure.
And these are fabulous and because they conquer most of the problems.
The disadvantage of these is cost.
The first two methods we talked about are very, very inexpensive.
Even if you had to buy a small strobe to put on your camera, you can get those things for
$30 online.
But these become an expense per unit that you have to purchase.
But they overcome the issues of being outside because this will fire your strobes outside.
They'll fire your strobes a long ways away.
So I simply put this on my camera.
So this becomes a master.
This is going to send a signal out that's going to fire my strobes.
With the dyno lights and pocket wizard, the pocket wizard is already built into the dyno
light.
If you don't have that you're gonna need to get a B Unit that you hook up with a cable
to your strobe or to your mono block.
So you have your A unit on the camera, B unit at the power source, the mono block or this
other power out of the pack.
When I hit this, I sync all three of these.
I have two of them that are syncing by radio slaves and the last one is syncing by the
electronic eye or the slave on the mono block.
Now I'd like to say there are some very inexpensive options out there that really give you a great
product.
It's just how far away do they work and reliably how far away can you get them.
Some are radio.
Some are infra-red.
I mean, there's several different things out in the market today.
So, there's the three main ways to be able to sync your camera with your strobe.
But now let's take a look at my strobe cable emergency kit.
So this is my syncing emergency kit.
What I have in here is all the stuff that I need to be able to sync with anything that
I may ever need to sync to.
It's neatly organized so we know exactly what is there, exactly what we have.
But if I were to take and get rid of all of this, this is what you really need.
I have a mini jack to strobe sync.
I have a Edison to strobe sync.
And I have the quarter inch to strobe sync.
There's your three major ways you sync with strobes.
You've got your mini, your quarter and Edison.
Edison is not used that much anymore but it used to be used on speedotron strobes.
There are some out there still.
So each of these have the end that go into the sync port on your camera.
Then when I start using radio slaves which I do.
Probably most of things that we do are done with radio slaves.
It's a more expensive way to go but it's what we use constantly.
So my radio slave syncs with a mini at the back.
But now I've got to be able to adapt that to whatever strobe platform.
So I've got a mini cable, mini to mini, and then I've got an adapter that goes to quarter
and that will fire the strobes as well.
So now I don't have to buy tutoring cables but I've got the mini and I've got the adapter
and that gives the ability to sync with both of those different platforms.
I get stereo cables.
You don't have to have stereo.
You can run this on mono.
But I get stereo cables because I can use them in audio applications and other applications
as well so it's just as well have stereo.
But then, of course, I always have the cable that gives me the mini jack to the Edison
just in case I want to be able to run my radio slaves with an older platform like the speedotrons.
So there are absolutely other strobes out there that are going to have a proprietary
way to attach the cable to the back of the strobe.
They all go back to that same adaptor, to the camera, because that's standard on the
cameras.
And so you may need to look at something that's going to adapt itself to your strobe.
But these are the three major ones that you work with, most of the things you're going
to encounter in the United States.
You might think to yourself, "Well, I'm not gonna have any other strobe platforms because
I just use certain ones."
I've been on location and decided, "You know what?
We better rent a strobe."
And we're in some little town and the only thing we can find is…and you don't have
the cable.
So I carry these cables with me always so I can adapt myself to any of the different
platforms that are out there.
Also, if you check out our Mastering Studio Strobes, we go into great detail about the
different types of strobes and how you sync with each of them and how you can use them
effectively in lighting set ups as well as just the technical ways to use your strobe
equipment.
So get out there.
Check out that Mastering Studio Strobes over at theslantedlens.com.
So there's a look at cables, what will keep you from having a problem when you're on set.
Sync those strobes and make some great images.
So keep those cameras rolling.
Keep on clicking.
[00:07:44] [Music]
[00:07:56]
Don't forget to subscribe to "The Slanted Lens."
Like us on Facebook.
Tell your mother about us.
Tell your mother's mother about us.
-------------------------------------------
Aventador S Roadster #SinceWeMadeItPossible :Lamborghini Press Conference IAA 2017 (short) - Duration: 1:19.
For more infomation >> Aventador S Roadster #SinceWeMadeItPossible :Lamborghini Press Conference IAA 2017 (short) - Duration: 1:19. -------------------------------------------
When Is It Better To Speak In Person Rather Than Text? | TODAY - Duration: 3:12.
For more infomation >> When Is It Better To Speak In Person Rather Than Text? | TODAY - Duration: 3:12. -------------------------------------------
Reporter Katy Tur Talks About 'Unbelievable,' Her Book About The Trump Campaign | TODAY - Duration: 4:31.
For more infomation >> Reporter Katy Tur Talks About 'Unbelievable,' Her Book About The Trump Campaign | TODAY - Duration: 4:31. -------------------------------------------
funny cats compilation 2017 | funniest animals fails ever try not to laugh #12 - Duration: 10:50.
For more infomation >> funny cats compilation 2017 | funniest animals fails ever try not to laugh #12 - Duration: 10:50. -------------------------------------------
Jeep Wrangler Raxiom 50" Slim Straight LED Light Bar (1987-2017 YJ, TJ, JK) Review & Install - Duration: 4:15.
This Raxiom 50-inch Slim Straight LED Light Bar is for those of you that have a 1987 and
up Wrangler and are looking to add a 50-inch LED light bar to your Jeep but aren't interested
in one that's as chunky and clunky as those more traditional double-row LED light bars.
This, of course, is a slimmer version of those light bars.
This is going to be a single row of lights, so you are going to get a little bit less
light output from this light bar.
However, if we're being honest with ourselves, the light output that you get from a dual-row
50-inch is more than most of us need.
This is even going to be more than what most of us need.
And, in my opinion, this looks a lot better on most Jeeps than those double-row bars do.
So if you prefer to look at this, if you're okay with the slightly lessened light output,
I think, this is going to be a pretty nice option for you.
So for the installation, I am gonna give this a two out of three wrenches because of the
wiring that's involved.
Actually getting the bar itself installed is a very simple process if you're going to
purchase one of the brackets which again, most of you are going to do and I would highly
recommend doing.
Now Raxiom certainly isn't the only one making a slim LED light bar like this one.
However, I do like the Raxiom brand because they build a quality product at a more affordable
price.
Now you can get a slim light bar like this that is two, three, four times as expensive
as this one is and you might get a little bit more light output, a few more lumens,
throw a little bit further down the trail in front of you, but you are certainly going
to pay for that.
And on the flip side, you can get a much less expensive 50-inch light bar.
You can get a slim light bar like this, including a harness and a bracket for $100, but chances
are you're gonna end up with condensation behind the lens, burn-out individual LEDs
or a light that doesn't work at all in a short period of time.
So I think that this is going to be a really nice balance of value and price.
So as far as the construction goes, this is an extruded aluminum housing with a polycarbonate
lens.
This is going to have 50 LEDs that run across it that are going to give you your light output.
This is going to come with a pair of feet that you can drill and install this wherever
you choose to.
However, the vast majority of you are going to wanna buy a bolt-on 50-inch LED light bar
bracket, so that you can install this without the need to drill anything into your windshield
frame.
This light is also going to come with a two-wire pigtail which is pretty traditional these
days for auxiliary LED lighting.
You are going to have to either make a wiring harness, purchase a wiring harness or take
your Jeep somewhere to have this wired up and installed for you if you're not comfortable
with automotive wiring.
So for the installation, I am going to give this a two out of three wrenches because of
the wiring that's involved.
Actually, getting the bar itself installed is a very simple process if you're going to
purchase one of the brackets which again, most of you are going to do and I would highly
recommend doing.
That way you don't have to drill anything and it makes the install a breeze, so all
you'll have to do is pull a couple of bolts out of your windshield hinges, off the brackets
in place and drop the bar on to the brackets.
Once that part's done if you are going to do your wiring, you'll have to get your switch,
your fuse, your relays, all your wire together and get a switch to 12 volt source up to your
pigtail on your light itself.
If you're purchasing wire harness, you'll have to pull the wires on the right places
and check all the proper connections.
And, as I said before, if you're not comfortable with automotive wiring, that's okay too.
Just take this to a shop and they'll wire it up for you.
This light bar is gonna run you right around $350 and I do think again that that's a very
fair price.
With this bar, you are going to get a quality light bar.
You're gonna get a ton of light output, probably more than most of us need.
And, aesthetically, I think this looks a lot better on the Jeep.
If I were to purchase a light bar, this is the amount of money that I would be comfortable
spending and it's going to give me the look and the functionality that I'm after.
So if you're looking for a slim 50-inch LED light bar, I would definitely recommend looking
further into this one from Raxiom that you can find right here at extremeterrain.com.
-------------------------------------------
How to Lose Weight Quickly Using Baking Soda (3 Homemade Recipes) - Duration: 3:06.
The process of weight loss happens through Associate in
Nursing indirect mechanism, since the advantages of
bicarbonate on the blood facilitate reach this goal additional quickly.
How baking soda helps with weight loss
According to the knowledgeable Saint George M. Wolverton, AN alkalescent body transforms
fat into muscle and energy, whereas AN acidic body burns muscle and stores fat.
it's for this reason that incorporating saleratus will facilitate regulate your weight.
Indirect mechanism of weight loss For Robert O. Young, author of the book "The
pH scale Miracle", sodium hydrogen carbonate as a part of associate alkaline diet will
balance the pH scale of the blood, that reduces acidity and improves natural action of cells,
digestion and overall health.
in line with the professional Don Colbert, author of "The Seven Pillars of Health",
in associate alkaline atmosphere, the body's tissues can unleash toxins a lot of expeditiously.
this enables for higher regulation of fat, and additionally improves your physical look.
You should use caution once intense bicarbonate, since excess consumption will have negative
effects on the body.
in keeping with consultants, simply a pinch in your drinks or foods can facilitate accelerate
your metabolism and burn fat.
For this reason, before you begin to include it in your diet we tend to suggest you consult
a health skilled.
The United Nations agency has same that newborns United Nations agency don't begin to breathe
ad lib have a high concentration of acid in their blood.
endovenous infusions of baking soda (baking soda) ar essential within the treatment to
scale back accumulated acids.
Prepare your body for weight loss The weight loss result is made indirectly,
since the advantages of bicarbonate on the blood facilitate to attain this goal additional
quickly.
however this will be thought-about a vital step within the fight against excess weight
and alternative health issues, since it prepares the body for easier and healthier weight loss.
-------------------------------------------
One Minute Tech: Using Ads For Message Testing - Duration: 1:15.
Hi, this is Nicole, and I want to talk a little bit about paid ads.
So whether you use Google ads or Facebook ads or whatever, a lot of times you know people will just
pay an extra 5 bucks to get more people to see an ad and I guess I'm ok with that
if it's a limited thing.
But what I want to urge you to do is use ads for message testing.
And I guess the best case I've heard of this is not even my thing but Tim Ferris when he wrote the a
book that was called "The 4 Hour Work Week".
He had a bunch of titles like he had over 20 titles that he actually took Google Adwords and he tested them and
based on, you know, how
many people clicked through, he knew that
certain titles were gonna work better than others.
I think someone in an interview asked him what the worst title was in terms of performance, and he said like
"Broadband and White Sand" or something like that. Anyway all this to say is you think you know it's important about your product
but you can take out a very small budget and basically do an online focus group using a paid ad service like Facebook or Google
to test your different messages, so consider ads for message testing. It's fun and relatively straightforward.
Thanks for watching and I'll see you in the next video.
-------------------------------------------
Amazing Man Breed Cows - Cow Thailand vs Lao vs Vietnam - How to bred cows in my Country - Part 14. - Duration: 10:17.
-------------------------------------------
Gene Simmons Of KISS Talks About New Box Set Of Unreleased Songs | TODAY - Duration: 3:17.
For more infomation >> Gene Simmons Of KISS Talks About New Box Set Of Unreleased Songs | TODAY - Duration: 3:17. -------------------------------------------
JUST IN: Benghazi Hero Lashes Against Hillary On Anniversary Of Embassy Attack "Sociopath" - Duration: 1:38.
Army Ranger Kris 'Tanto' Paronto was one of the heroes who lived through the hell of
the Benghazi attack on September 11, 2012.
Hillary Clinton's State Department issued a stand down order to special forces prepared
to assist stranded Americans who were surrounded by hundreds of Islamic insurgents.
And on the fifth anniversary of the tragic incident — in which four American lives
were lost (Tyrone Woods, Sean Smith, Ambassador Christopher Stevens and Glen Doherty) — Paronto
had a few choice words for Clinton.
Paronto made himself clear in a response to James Woods' tweet, which read: "Hillary
Clinton doubled down on her 'Trump is deplorable' narrative, forgetting her husband used an
intern as his personal cigar humidor."
The Benghazi hero responded: "Oh the sociopaths always forget their own indiscretions and
sinful behavior" and tagged Hillary and Bill Clinton.
In the past, Paronto has been extremely vocal about his contempt for Hillary Clinton.
"I don't think [Clinton] has a soul," Paronto said of Clinton during an interview
with Hearst Connecticut Media.
"I hope it haunts her.
I don't think it will."
"She lied to the family members, period," Paronto said.
"People are believing her over the family members of teammates that I lost."
what do you think about this?
Please Share this news if you stand with Kris 'Tanto' Paronto!
Scroll down to comment below and don't forget to subscribe top stories today.
-------------------------------------------
Tomoko & Kibi Eat My Face! [CC subtitles below] - Duration: 4:43.
For more infomation >> Tomoko & Kibi Eat My Face! [CC subtitles below] - Duration: 4:43. -------------------------------------------
Actor Harrison Ford Directs Traffic In New York City | TODAY - Duration: 0:48.
For more infomation >> Actor Harrison Ford Directs Traffic In New York City | TODAY - Duration: 0:48. -------------------------------------------
TAYLOR & AT&T BEHIND THE SCENES - Duration: 0:49.
HEY TRIPPSTERS Taylor Swift news if you would like to see the behind the scenes
of the commercial that Taylor shot with a TNT you can check it out on her
youtube channel I will link directly to the video in the description below and
it is a very short clip of just a few little behind-the-scenes things that
took place during the filming of the AT&T commercial so it's just it's short
it's sweet it's it's wonderful I love it I'm a huge Taylor fan if you can't tell
but I thought you know you Taylor fans might like to see a little bit of the
behind the scenes footage and Taylor has it up on her YouTube channel if you'd
like to see it the link is in the description but that is going to do it
for now this is ICEPETS Queen and I am tripping out
-------------------------------------------
The 'Magic' Video Sheinelle Jones Made With Zach King | TODAY - Duration: 1:43.
For more infomation >> The 'Magic' Video Sheinelle Jones Made With Zach King | TODAY - Duration: 1:43. -------------------------------------------
Thịt trâu nướng thơm ngon bảo quản thịt - Duration: 12:34.
For more infomation >> Thịt trâu nướng thơm ngon bảo quản thịt - Duration: 12:34. -------------------------------------------
TheVR AC BLACK FLAG - LEGJOBB PILLANATOK! | Assassin's Creed IV: Black Flag - Duration: 7:13.
TheVR legjobb/buzis pillanatok!😂👬 K2hunDavid TheVR 48h STREAM - LEGJOBB PILLANATOK (fanmade) Creativus Studio Dani0001 - fogaddelte
TheVR ASSASSIN'S CREED III TheVR ASSASSIN'S CREED REVELATION, TheVR Streamek Official,
TheVR Stream Percek,
TheVR Streamek Archívuma, TheVR Legjobb jelenetek, TheVR Cat Mario, TheVR Montázs, TheVR Montage, TheVR Vicces Jelenetek, TheVR Félreérthető Pillanatok, TheVR Happy Hour, TheVR PUBG, KODIAK, Yeahunter, Dredd, Azmo, Sonziii, VITORLÁKAT FEL! ARRRR.... #PÉCÉ | Assassin's Creed IV: Black Flag #1 - 08.25. VITORLÁKAT FEL! ARRRR.... | Assassin's Creed: Black Flag #2 - 08.25. ARRRR!!!! #PÉCÉ | Assassin's Creed IV: Black Flag #3 - 08.28. USH FOR MAYA!!! ARRR... #PC | Assassin's Creed IV: Black Flag #4 (end) - 09.04. NW-Studio™
-------------------------------------------
Channel 24 News 12 September 2017 Bangladesh Latest News Today Update News Bangla Tv News Today - Duration: 19:50.
bangladesh news 24
Không có nhận xét nào:
Đăng nhận xét