Youtube daily Nov 6 2017

How to draw a CARTOON TANK

For more infomation >> How to draw a CARTOON TANK - Duration: 2:50.

-------------------------------------------

Bass Boosted Music Mix 2017 - Party Club Dance Mix - Дискотека 2017 - Duration: 57:20.

We hope you enjoy this fine selection of the best music, please feel free to share our videos, happy listening, just enjoy the music and subscribe for more!

For more infomation >> Bass Boosted Music Mix 2017 - Party Club Dance Mix - Дискотека 2017 - Duration: 57:20.

-------------------------------------------

Logan 'I'm Done' Scene | X-Men Origins: Wolverine (2009) CLIP - Duration: 2:58.

Ask him where he found it.

Okay.

He says it came from the sky.

He's telling the truth.

You don't know the language, Logan.

- It's a meteor fragment. -I know what it is.

I'm asking him where he found it.

Sir, base wants to know our location.

- Shut them down. -Yes.

Tell him everyone here will die

unless he tells me where he found the rock.

- He says that it's sacred. -Okay, fine.

Victor.

Victor!

Don't even think about it.

We didn't sign up for this.

Put him down!

What are you doing?

We finally got a good thing going here. Don't you screw this up.

Enough. That's enough. We've done enough.

Who do you think you are?

This is what we do.

Maybe you'd rather be rotting in a hole somewhere

till they figure out a way to do it to us. Is that it? Huh?

I'm done.

You coming?

Jimmy!

We can't just let you walk away.

Jimmy!

Jimmy!

For more infomation >> Logan 'I'm Done' Scene | X-Men Origins: Wolverine (2009) CLIP - Duration: 2:58.

-------------------------------------------

Top 10 Bass Boosted 2017 - Party Club Dance Mix - Дискотека 2017 - Duration: 47:04.

We hope you enjoy this fine selection of the best music, please feel free to share our videos, happy listening, just enjoy the music and subscribe for more!

For more infomation >> Top 10 Bass Boosted 2017 - Party Club Dance Mix - Дискотека 2017 - Duration: 47:04.

-------------------------------------------

Donna Brazile Fires Back at Clinton Team: 'Go to Hell' - Duration: 1:25.

Right after Hillary Clinton's team attacked Donna Brazile, she stood for herself firing

back at them in an epic way.

Brazile appeared on "Face The Nation" Sunday, bashing them in a shocking way.

The host, George Stephanopoulos, asked her about the critics she received about some

passages in her book that reveal that she was considering to replace Hillary Clinton

with former Vice President Joe Biden in the 2016 presidential election.

"For those who are telling me to shut up, they told Hillary that a couple of months

ago," she said.

"You know what I tell them, 'Go to hell.'

I'm going to tell my story."

The former chair of the Democrat National Committee said she didn't want to replace

Clinton but she was "under tremendous pressure" after Clinton fainted at a memorial service

for the victims of September 11, 2001.

"I didn't want to have a plan B. Plan A was great for me," she said.

"I supported Hillary and I wanted her to win, but we were under pressure."

Brazile said dealing with Clinton campaign was very exhausting, and referred to them

as "the high command of Brooklyn," opposing Clinton campaign's claims, "this wasn't

a standard joint fundraising agreement.

They had a separate memorandum of understanding and I needed to break that."

For more infomation >> Donna Brazile Fires Back at Clinton Team: 'Go to Hell' - Duration: 1:25.

-------------------------------------------

Donna Brazile: They Wanted To Kill Me 'Like Seth Rich' - Duration: 2:50.

For more infomation >> Donna Brazile: They Wanted To Kill Me 'Like Seth Rich' - Duration: 2:50.

-------------------------------------------

龍珠超：悟空「新形態」實力及「後續「劇情走向！ - Duration: 3:57.

For more infomation >> 龍珠超：悟空「新形態」實力及「後續「劇情走向！ - Duration: 3:57.

-------------------------------------------

The Good Place - Jason and Tahani's Wedding (Episode Highlight) - Duration: 2:34.

For more infomation >> The Good Place - Jason and Tahani's Wedding (Episode Highlight) - Duration: 2:34.

-------------------------------------------

Babblarna pussel. Babblarna Spelar i badkaret. Video Pussel för barn. - Duration: 1:59.

For more infomation >> Babblarna pussel. Babblarna Spelar i badkaret. Video Pussel för barn. - Duration: 1:59.

-------------------------------------------

Two Suspects Attack Florida Cop, Retired Officer Jumps In To Help - Duration: 2:19.

A police officer stopped a speeding car going over 100 miles per hour on I-75 in Collier

County.

But the two men inside the car decided to pull a little trick before getting out of

the vehicle.

The Florida officer, who remains unnamed, was alone when the suspects were flying down

the highway endangering themselves and others.

The policeman pulled them over but he wasn't expecting what happened next, the two suspects

switched seats before they got out of the vehicle.

Richard Lazo Torres was driving the car but he switched with Issac Ruiz Wilson, the other

suspect before the policeman came to the car.

They were rude towards the cop because Lazo didn't have valid driver license and that

would only add to the speeding charges, so both men decided to resist arrest.

The police officer succeeded to put them on the ground right before someone came behind

him to help him.

As automobiles were passing by one driver decided to stop and help, Jeffry Duclos, a

retired Rhode Island State Trooper, was that person.

Duclos has 30 years of police experience and respect towards the fellow officer, so he

deiced to help him and immediately threw himself into the fight.

Duclos managed to pull one suspect off the Florida cop so that the two police officers

could handle the suspects and arrest them.

"I think more people ought to be prepared to help," Duclos said, refusing to be praised

over something that every man in America should do when he sees an officer in need of back

up.

He also said that the Florida officer might not make it home that evening because "Other

people are in the car.

If they come out, he's got a major problem."

The liberal media present the retired police officer as the bad guy, seeing how the two

"unarmed" men ended up behind bars.

Anyhow, Duclos bravery can't be spun to look like something bad, the man simply helped

another man in need, if Duclos wasn't there the officer easily could have lost his life

or at least he would have been wounded.

Please share this post on Facebook with your thoughts.

What is your opinion on this?

Scroll down to comment below!

For more infomation >> Two Suspects Attack Florida Cop, Retired Officer Jumps In To Help - Duration: 2:19.

-------------------------------------------

How to Remote Program Productivity PLC Through the Stride SiteLink VPN Cloud - Duration: 2:54.

In this video, we will show the process of getting connected to a Productivity CPU through

the Stride Sitelink VPN router.

If you have not already setup you Router please see the videos for the initial setup, in the

description below.

Once you have setup your router then continue on to this video.

First we must discuss how the Productivity CPU's IP address needs to be setup.

This is IP address of the VPN router on the control side.

To remotely program your Productivity CPU it must be on the same subnet as the VPN router

and have the IP address of the Router as it's Default Gateway.

This way the CPU will be communicating through the router.

It is very important that everything is a static IP address, as one limitation of VPN

networks is that Broadcast comms will not work and broadcast comms is what is used for

auto discovery of devices.

So, let's set up the IP address of the Productivity CPU for the first time locally.

With your project open select Hardware configuration and then double click on the CPU.

Now, select the Ethernet Tab.

Here put in the IP address information we show from our example.

Now send this project to your CPU.

Now that the PLC has been setup and shipped to the remote site, let's make our first

connection through the Stride Sitelink.

Select your device and select connect.

Once the IX client is connected, open up your Productivity software and when this start

wizard comes up close it.

Now, go up to your tools and then options, and then select the connection tab.

If you do not know your average ping time to your remote device, I would start with

a 15 second remote CPU Communication time.

This is timeout time for the connection of your Programming software to the remote CPU.

Once you have set that Select Apply and then Ok.

Now go to The CPU menu and then Choose CPU.

Now select Add a connection.

Here enter in the IP Address of the Productivity CPU and then select Ok.

Now you will be able to connect.

A little safety disclaimer, before you make any changes to your PLC Remotely take into

account what you are activating and deactivating remotely as it may cause an unsafe condition.

It is always best to have local eyes on the equipment while making these changes.

This is where the digital input on the VPN router can be useful to lock out remote changes

until someone is there to monitor for safety purposes

If you have any questions about the Stride VPN router please contact AutomationDirect's

support team during regular business hours.

They will be glad to help.

Click on this video to learn more about AutomationDirect's many support options, click here to subscribe

to our YouTube channel for upcoming videos.

For more infomation >> How to Remote Program Productivity PLC Through the Stride SiteLink VPN Cloud - Duration: 2:54.

-------------------------------------------

Commerce Secretary Wilbur Ross Hid Ties To Vladimir Putin Cronies | Morning Joe | MSNBC - Duration: 8:14.

For more infomation >> Commerce Secretary Wilbur Ross Hid Ties To Vladimir Putin Cronies | Morning Joe | MSNBC - Duration: 8:14.

-------------------------------------------

Video: Brick Fest Live - Duration: 2:28.

For more infomation >> Video: Brick Fest Live - Duration: 2:28.

-------------------------------------------

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2✅✅ - Duration: 3:17.

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2

How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2

For more infomation >> How to Make a Free Website | Get Free domain and hosting | Using Wordpress Part 2✅✅ - Duration: 3:17.

-------------------------------------------

How to Remote Program Do-more PLC Through the Stride SiteLink VPN Cloud - Duration: 3:25.

In this video we will show the process of getting connected to a Do-more CPU through

the Stride Sitelink VPN router.

If you have not already setup your router please see the videos for the initial setup,

from the links in the description below.

Then once you have setup your router continue on to this video.

First, we must discuss the Do-more CPUs IP address.

This is IP address of the VPN router on the control side.

Now, to remotely program your Do-more CPU it must be on the same subnet as the VPN router

and have the IP address of the router as it's Default Gateway.

This way the Do-more CPU will be communicating through the router.

Now, it is very important that everything is a static IP address, as one limitation

of VPN networks is that Broadcast comms will not work and broadcast comms is what is used

for auto discovery of devices.

So now, let's set up the Do-More CPU's IP address for the first time locally.

From the Application Launchpad select Net Edit 3.

Now select Network and then adapter and verify that you are using the correct Network adapter.

Now, click on scan network and you should see your Do-more CPU.

Double click on the CPU and enter in the information as we discussed earlier.

That will change the IP address of your CPU.

Now that the PLC has been setup and shipped to the remote site, let's make our first

connection through the Stride Sitelink.

Select your device and then select connect.

Once the IX client is connected.

Open up the Do-more software and then we will need to make a new Link.

So, in the Link section here select New Link….

Select Ethernet and then UDP/IP and then select Next.

Now, from the adapter section here, make sure to select the Windows TAPP Adapter.

Now Select Link Editor.

Select your Do-more CPU type and then select the Port Tab.

In the IP address portion place the IP address of your CPU and then select the advanced settings

tab.

Here you probably need to increase your Timeout time.

This is the time that the Link will use to gauge if it has lost communication to the

CPU.

Increasing this time will overcome long communication time or spotty networks.

I typically place this at 15 seconds and then increase if I am having issues connecting.

Select Ok.

Now I will give the Link a name and then select Accept.

Now, I will Read in my project from the Remote Do-more CPU.

Now you will be able to program and control you PLC from around the world.

A little safety disclaimer though.

Before you make any changes to your PLC remotely take into account what you are activating

or deactivating remotely as it may cause an unsafe conditions.

It is always best to have local eyes on the equipment while making these changes.

This is where the digital input on the VPN router can be useful.

It will allow you to lock out remote changes until someone is there to monitor to safety

purposes If you have any questions about the Stride

VPN router please contact AutomationDirect's support team during regular business hours.

They will be glad to help.

Click on this video to learn more about AutomationDirect's many support options, click here to learn

more or see more videos on our many products, and be sure to click here to subscribe to

our YouTube channel for upcoming videos.

For more infomation >> How to Remote Program Do-more PLC Through the Stride SiteLink VPN Cloud - Duration: 3:25.

-------------------------------------------

Texas Rep. Henry Cuellar On Church Shooting: Everyone Knows Each Other | Morning Joe | MSNBC - Duration: 2:45.

For more infomation >> Texas Rep. Henry Cuellar On Church Shooting: Everyone Knows Each Other | Morning Joe | MSNBC - Duration: 2:45.

-------------------------------------------

The 'Antifa Apocalypse' Protest Was Just Few People Against Trump - Duration: 1:48.

So let's see the turnout of the 'Antifa apocalypse' protests.

The November 4th was expected to be the day when people will push for Trump/Pence regime

removal.

In 20 major cities, thousands of people were supposed to come to the streets and demand

for removal of President Trump and Vice President Mike Pence.

It doesn't come as a shock that President Trump and Pence are still in the office.

Refuse Fascism, is the group who organized the protests, the group that includes Bill

Ayers as one of the founding members.

This group has been organizing almost every anti-Trump protest and they've been working

months to put together this "major" protest.

So, let's see what happened.

Cleveland was pretty much empty and low on energy.

Just few people showed up at the White House.

Just see the shirt on the man with the flag.

The Antifa apocalypse in New York was fail as much as it was in the other cities, there

were not enough people for the signs to be hand out.

And in Los Angeles, there were more Trump supporters than protesters.

In Austin 30 people protested against President Trump and 200 were there showing their support

for him.

Portland, Oregon, where usually the violence happens, was low on energy as well.

There were also displays of Communist nature in Refuse Fascism.

And even though there were just a few, that didn't mean they didn't want to be violent.

In Los Angeles, they were preparing for violence but the police handled them at the start.

This woman had a bat but the police took it from her.

The police confiscated other weapons and dragged away one guy who tried to attack Trump supporters.