This RedRock 4x4 Stubby Front Bumper with Winch Mount and Stinger and LED Lights is
for those of you that have a 2007 to 2018 JK that are looking for a stubby bumper that
has a ton of features packed into it all at a very fair price.
This is a bumper that won't install pretty easily onto your Jeep.
I'm gonna give it a two out of three wrenches only because of the wiring necessary to get
these lights worked out.
But other than that, the bumper will bolt directly onto your Jeep.
And we'll talk a little bit more about the installation in just a second.
Now, this is going to be a stubby front bumper, so a lot of you guys are gonna be installing
it because you're on a 37-inch tire, you're having some appearance issues between your
factory front bumper and that big tire.
Others are just going to wanna run a stubby bumper because you like the look of it, and
that's perfectly okay, too.
This does give your Jeep a very utility look, a very off-road style and look to it.
Like I said, this also has a ton of other features that I'm gonna get into in just a
second.
Overall, I think RedRock 4x4 does a really nice job of balancing quality and price, so
I think you're going to get a ton of features in a nice, compact, good-looking package all
for a very fair price.
So I guess that I think this is a very well-built package.
This is .16-inch thick steel.
It's a .12-inch wall thickness, 2-inch diameter, 2 for the stinger, covered in a textured black
powder coat finish.
It's gonna look good.
It's gonna hold up well, resisting rust and corrosion.
So, overall, again, a pretty nice little package here.
But what I really like about this is all of the features.
As it says in the name, Winch Mount, Lights, Stinger.
It's got a lot going on.
So usually when you have a stinger bumper, there's not a lot of space there.
You're not going to get to reuse your factory fog lights.
And that's the case with this bumper.
However, this does give you a set of LED lights that are going to be able to be used in place
of those factory fogs if you choose to.
You can really switch them in a variety of different ways, but they're gonna be included
with the bumper.
And they install right inside of the bumper, making for a really seamless installation.
All right.
Next to those lights, you're gonna have some d-ring mounts.
They're gonna need to be welded and bolted directly onto the frame, giving you a really
strong recovery point.
And this also does come with the d-rings, which, while it's not a make or break reason
to buy this bumper over another one, it is nice you have that convenience.
You don't have to remember to buy something extra.
We're in the middle of the bumper.
Of course, you have your winch mount.
This will hold up to a 12,000-pound winch, and you have the slot in the center for your
fairlead.
This is also going to sink the winch down a little bit, giving you a little bit of a
sleeker look from the front, which is something I really like.
And then, of course, this has a stinger on it as well.
Now, originally, a stinger was there so if you're coming down a really steep obstacle,
the Jeep starts to flip forward on you.
It's gonna hit the stinger which will kick it to one side or the other, putting it back
down to the tires.
It was also there in case you were to roll over or flop completely on your lid.
The weight of the vehicle would be held up by the stinger and not crush the radiator,
so you could just flip the Jeep back over again and keep cruising.
Now, this is going to be more of a style thing than anything else.
This doesn't have a ton of gussets on it.
It's not going to add a ton of additional strengths.
So it's not really going to be able to stand up to all that abuse.
But if you do like the look of a stinger, this is certainly going to provide that.
So, as you can see, this thing has a ton of features built into a nice, compact, stubby
bumper, and all at a very fair price.
I think this is a really nice choice for you.
This bumper's gonna run you $450.
That includes the lights.
It includes the stinger and the winch mount, everything that you see here.
And I've said it a couple of times that I do think that it's a very fair price for what
you're getting.
A lot of stubby bumpers certainly leaving some stuff out because there's not a lot of
real estate.
I think this packs a ton of great features into a nice, compact piece that's still really
well-built.
And it still looks good so I think this is a very fairly-priced package.
So, like I said, two out of three wrenches only because of the wiring necessary on this
bumper.
The first step is going to be removing your factory bumper.
You're gonna remove the splash shield and also your frame cover.
You're going to remove the factory fog light sockets from the housings, unbolt the bumper,
remove it from the jeep.
Then you're going to do some assembly on your new bumper.
You're going to get the stinger bolted onto the new bumper.
It's just gonna be easier to get to those bolts while the bumper is on the ground or
on a table than after it's already been installed on the Jeep.
If you are installing a winch on this bumper, I'd also recommend bolting the winch onto
the bumper as well.
Again, it makes it easier to get to those mounting bolts.
The whole package, of course, is gonna be heavier once the stinger and the winch are
mounted onto the bumper, but I do think it's worth it to not have to fight with those bolts.
Once you have everything bolted onto this bumper, it's just a matter of setting it over
the frame horns and bolting it onto the Jeep.
Once that's done, you'll have to get into the wiring, and this is where you have a couple
of different options with how you can switch these.
If you wanted to tap into the factory fog light system, you can do that.
These are not going to be as focused.
They're not going to be a fog beam like your factory lights are, so I still wouldn't recommend
using these while you're rolling down the road with oncoming traffic.
But if you're on a dark back road and you're off-road, you're going to still be able to
use these.
And since you're not using that fog light switch, that factory fog light switch, for
anything else anyway, wiring these to that could be a viable option for you.
If you have another switch panel and you have other switches available, you can go ahead
and wire them to that.
Really up to you.
So if you're looking for a stubby front bumper with a ton of features, I definitely recommend
this option from RedRock 4x4, and you can find it right here at extremeterrain.com.
For more infomation >> Mila Kunis On "The Spy Who Dumped Me" & Reveals The Reason She's Not On Social Media | TODAY - Duration: 5:54. 
For more infomation >> rei brown - Real Love (Lyrics english and spanish) - Duration: 3:13. 
For more infomation >> Who is Tyler Mitchell? The Beyoncé-chosen photographer could be shooting her for the cover of Vogue - Duration: 4:43. 
For more infomation >> Alan Alda reveals he has Parkinson's disease - Duration: 1:44. 
For more infomation >> Meghan Markle and Kate Middleton will attend the wedding of Charlie van Straubenzee - Duration: 3:53. 
For more infomation >> Hoang mang về tác hại của ngũ vị tân. Tư Vấn Phật Pháp - Duration: 31:14. 
For more infomation >> Person rescued from three-alarm Weston house fire | American Today – 10 Amazing - Duration: 1:22. 
For more infomation >> Singer, dancer . . . editor: Beyoncé given 'unprecedented' rule over Vogue cover shoot | News - Duration: 1:15. 
Không có nhận xét nào:
Đăng nhận xét