This Smittybilt Vinyl Fold and Tumble Rear Seat in Black Denim is for those of you that
have a 1997 to 2006 TJ that are looking for a replacement rear seat that's going to do
pretty much everything that the factory rear seat does, but do it in a slightly different
way.
So this seat's going to have a slightly different shape to it.
It's still going to fold and tumble, as it says in the name, but it is going to do it,
again, in a little bit of a different way than a factory seat does, but it is still
going to have the same functionality, and we'll talk a little bit more about that in
just a second.
So, as far as the installation goes, this is going to be a very easy seat to install.
Because the functionality of the seat is slightly different, you are going to have to swap out
those factory rear seat brackets even if you have a good set in place, but, again, not
a big deal.
It bolts right into place, one out of three wrenches, and we'll show you how to do that
in just a second.
So this seat, again, is still going to fold and tumble.
It's going to have a lever here that folds and a lever in the back that tumbles, instead
of having just one lever on the side that will both fold and tumble the seat.
So, again, slightly different way that it does what it does, but it still has all that
same functionality.
Little bit of a different shape with having wings in the back here, but, again, very comfortable
seat, very similar to a factory seat in everything that it does.
If you have a rear seat in your TJ already, it's starting to get worn out, you don't want
to get it recovered or re-foamed, maybe your seat's missing entirely, and you just want
a good aftermarket seat that's going to allow you to carry a few more passengers in your
TJ, I think this is going to be a nice choice.
And for the quality that you get, I also think it's pretty fairly priced.
This is going to be a steel tube rear seat, which is pretty standard for most seats.
They're going to have a tubular steel frame that is going to be black powder-coated.
Then you're going to have all of your steel springs that go across.
Of course, the foam, and then this is covered in this vinyl material, which makes it very
easy for cleanup, especially if you're somebody who has the top off of your Jeep often, you
can get all sorts of things on your interior, and this is going to be really easy to clean.
It also looks really good.
It's going to hold up really well, and, again, it's going to have all the same functionality
as a factory seat and the fact that it will fold and tumble.
This seat's going to run you $270, and I do think that's going to be a pretty good price.
It comes with all the brackets you need.
It is going to be specific to your TJ, and it's a nice, comfortable seat that's going
to hold up pretty well.
In general, seats are pretty expensive.
They take a lot to build.
They do have a higher price tag than some of the other pieces that you might get for
your Jeep or maybe that you would expect if you haven't done a lot of seat shopping.
But in the world of seats, this is going to be a pretty fair price, and I do think you're
getting a quality seat.
Now, I'll have somebody from the install team to show you how you get this bolted in.
First thing we're going to do is remove our rear seat.
We're going to fold it forward, and we can push up on the release tab right here, and
fold it forward.
All right.
We want to fold our carpet back so we can remove the seat brackets.
I've got a 13-millimeter socket on my ratchet here.
We do have a mismatched bolt here.
I have a 730 seconds Allen wrench.
These bolts are known to break in the floor, so take extra caution when you're removing
them.
Peel our carpet back on the left side.
Remove our 2 bolts with a 13-millimeter socket.
We're now ready to remove our stock rear seat.
Now that we have our stock seat out, we can begin by installing the new seat brackets
that come with the seat.
So we're going to use the stock bolts that we took out of the seat brackets, and we're
going to get the left side bracket installed first.
All right.
We're going to get our left side bracket installed here.
We'll put it in place, and we're going to use two of the bolts that we took out previously.
We're now ready to get our new seat in place.
So what we want to do here is get the pin that has the notch in it into the hole of
the bracket.
And once we have that pin through the bracket, we're going to take the provided clip and
snap it into place to prevent the seat from sliding out of the bracket.
Now that we got our left side bracket installed with the C-clip, we're going to do the same
thing on the right side.
I'm going to flip the seat up, slide the pin into the bracket, and then bolt the bracket
down to the floor of the Jeep.
Flip it up.
Now we can fold our seat up, and then we'll slide our bracket onto the pivot pin.
And once we have the bracket on the pivot pin, we are going to install the C-clip again,
just like the other side.
We can actually fold our carpet back now.
Get our bracket into place.
All right.
We're going to get a couple of bolts into our bracket here.
We have a mismatched bolt here.
These bolts are known for breaking in the floor.
We broke one previously and fixed it already.
All right.
We can fold our carpet back now.
Last step of the install here is to install the striker plate into the floor.
So what we need to do is remove the two seat belt brackets here with a T50 Torx.
We'll install a striker plate, and then we'll put our seat belt brackets back on top of
the striker plate.
I have a T50 Torx on my impact gun.
We can remove our seat belt.
All right.
We'll slide our striker plate under the carpet.
We're going to use the center hole, and now we could put our seat belts and the bolt right
back into place here.
And we'll tighten this down.
Once you've got your striker plate installed, you can fold your seat back down and lock
it in place.
Then you want to feed your seat belts up through the back of the seat here.
And we can fold the seat back up.
That's going to wrap up our review and install of the Smittybilt Black Denim Rear Seat.
Be sure to check out more at extremeterrain.com.
For more infomation >> Perfeccionismo: Faz bem ou mal? - Duration: 6:50. 
For more infomation >> Reol / Monster (Nika Lenina Russian Version) - Duration: 3:36. 
For more infomation >> Rescuers Continue Weighing Safest Options To Save Trapped Soccer Team | TODAY - Duration: 3:19. 
For more infomation >> Britischer Innenminister: Russland muss erklären, was in Amesbury geschehen ist - Duration: 2:29. 
For more infomation >> President Trump Makes No Mention Of His Supreme Court Pick During July 4th Celebration | TODAY - Duration: 2:46. 
For more infomation >> Trapped Boys In Thailand Are Being Trained To Swim, Use Diving Equipment, Diver Says | TODAY - Duration: 3:37. 
For more infomation >> DESTROY BY ANY METHOD! ANTISTRESS ON THE PHONE! Game Kick the Buddy from Kick SPT se Badi - Duration: 10:25. 
Không có nhận xét nào:
Đăng nhận xét