Hello everyone and welcome to our Test and Measurement Basics show,
where we will share with you tips and tricks to make the most out of your measurement.
And today we have a challenge,
that is to set up our DAQ for temperature measurement within 90 seconds!
But before that, let me introduce you to our new intern.
Sharon, come on in!
Hi, I'm Sharon.
So, Sharon you told us that our DAQ is so easy to use that you can set it up
to measure temperature within 90 seconds?
Yes.
Right? Okay, let's do it!
Are you ready, Sharon?
Yes.
Alright, 3…2…1, Go!
Okay, now we get the General Purpose MUX card, the 34901A.
Open up the cover.
Now, we want to join the J-type thermocouple to Channel 1.
So, the white wire to HIGH.
Screw these in.
And the red wire to LOW.
Now, close up the cover.
We want to plug this in, to Slot 1.
Now, we wait for it to initialize.
It's going to take some time.
Sharon, we are halfway there!
Yea, waiting.. Okay!
Now we can use this knob to scroll through the menu, to choose your options.
Now for the channel we want 101.
Press Measure.
We want temperature.
Measure.
We are measuring thermocouple.
Press Measure again.
J-type. That's our type.
And then Measure.
So we choose the units, we want Degree Celsius.
And select 0.1 resolution.
Press Measure again.
And finally press Monitor to begin your measurements.
Done! With 5 more seconds to spare! Nice!
Wow, that was fun! I hope you enjoy today's episode.
Don't forget to subscribe to our YouTube channel.
See you again, and Happy Measuring!
Nicely done, Sharon!
Không có nhận xét nào:
Đăng nhận xét