Thứ Ba, 19 tháng 6, 2018

Youtube daily Jun 19 2018

Ever since I was a young girl, I was always fascinated --

(Laughter)

Oh!

(Laughter)

OK, I meant younger and more short.

(Laughter)

If that's possible to imagine.

But ever since I was a young girl,

I was always fascinated with how the world worked exactly how it did.

So this, very early on,

led me to the fields of mathematics and chemistry.

I would keep going further and further, and as I kept going,

I realized that all the fields of science are interconnected.

And without one, the others have little or no value.

So, inspired by Marie Curie and my local science museum,

I decided to start asking these questions myself

and engage in my own independent research,

whether it be out of my garage or my bedroom.

I started reading journal papers,

started doing science competitions,

started participating in science fairs,

doing anything I could

to get the knowledge that I so desperately wanted.

So while I was studying anatomy for a competition,

I came across the topic of something called chronic wounds.

And one thing that stood out to me was a statistic

that said that the number of people in the United States with chronic wounds

exceeds the number of people with breast cancer,

colon cancer, lung cancer and leukemia, combined.

Hold up.

So what is a chronic wound?

(Laughter)

And why haven't I heard about a 5K walk for chronic wounds,

why haven't I even heard about a chronic wound in general?

(Laughter)

So after I got past those preliminary questions,

and one that I will clarify for you,

a chronic wound is essentially when someone gets a normal wound,

except it fails to heal normally

because the patient has some kind of preexisting condition,

which in most cases is diabetes.

So more staggering statistics were to be found

as I kept going on in this research.

In the year 2010 alone,

50 billion dollars were spent worldwide to treat chronic wounds.

In addition, it's estimated that about two percent of the population

will get a chronic wound at some point in their lifetime.

This was absurd.

So as I started doing more research,

I found that there was a correlation

between the moisture level inside a wound dressing

and the stage of healing that the chronic wound would be at.

So I decided, why don't I design something

to measure the moisture level within the wound

so this can help doctors and patients treat their wounds better.

And essentially, expedite the healing process.

So that's exactly what I set out to do.

Being a 14-year-old working out of her garage-turned-lab,

I had a lot of constraints.

Most being that I wasn't given a grant, I wasn't given a lot of money,

and I wasn't given a lot of resources.

In addition, I had a lot of criteria, as well.

Since this product would be readily interacting with the body,

it had to be biocompatible,

it also had to be low-cost,

as I was designing it and paying for it myself.

It also had to be mass-manufacturable,

because I wanted it to be made anywhere, for anyone.

Thus, I drafted up a schematic.

What you see on the left hand-side is the early schematics in my design,

showing both a bird's-eye view and also one stacking variant.

A stacking variant means

that the entire product is consisted of different individual parts

that have to work in unison.

And what's shown there is one possible arrangement.

So what exactly is this?

So I had gone on to testing my sensors

and as all scientists have stumbles along their work,

I also had a couple of problems in my first generation of sensors.

First of all, I couldn't figure out

how to get a nanoparticle ink into a printcheck cartridge

without spilling it all over my carpet.

That was problem number one.

Problem number two was,

I couldn't exactly control the sensitivity of my sensors.

I couldn't scale them up or down,

I couldn't really do anything of that sort.

So I wanted something to solve it.

Problem one was easily solved by some scouting on eBay and Amazon

for syringes that I could use.

Problem two, however, required a lot more thought.

So this is where this factors in.

So what a space-filling curve does

is it aims to take up all the area it can within one unit square.

And by writing a computer program, you can have different iterations

of the different curve,

which increasingly get close to one unit square,

but never quite reaches there.

So now I could control the thickness, the size,

I could do whatever I want with it, and I could predict my results.

So I started constructing my sensors

and testing them more rigorously,

using money that I had gotten from previous science fair awards.

Lastly, I had to connect this data in order to be read.

So I interfaced it with a Bluetooth chip,

which you can see here by the app screenshots on the right.

And what this does is that anyone can monitor the progress of their wound,

and it can be transmitted over a wireless connection

to the doctor, the patient or whoever needs it.

[Continued Testing and Refinement]

So in conclusion, my design was successful --

however, science never ends.

There's always something to be done, something to be refined.

So that's what I'm currently in the process of doing.

However, what I learned was

what's more important than the actual thing I designed

is an attitude that I had taken on while doing this.

And that attitude was,

even though I'm a 14-year-old working in her garage

on something that she doesn't completely understand,

I could still make a difference and contribute to the field.

And that's what inspired me to keep going,

and I hope it inspires many others to also do work like this

even though they're not very sure about it.

So I hope that's a message that you all take on today.

Thank you.

(Applause)

For more infomation >> A teen scientist's invention to help wounds heal | Anushka Naiknaware - Duration: 6:59.

-------------------------------------------

'The King of Bougie' 🥂Official Season 1 Trailer | Basic to Bougie | MTV - Duration: 1:01.

- Yo, wassup y'all, I'm Timothy DeLaGhetto.

- I'm Darren "Big Baby" Brand.

- [Timothy] And you are watchin' Basic to Bougie.

We're gonna be tryin' three different versions

of each dish.

- Just jump in there, just jump in there.

- [Timothy] And see if we can figure out

which one is the cheapest.

- This is basic as (bleep).

- Man, these are so whack.

- That is nasty.

- [Timothy] And which is the most expensive.

- That is good.

- It's doin' too much.

- Bruh, you're eatin', you're makin' me eat.

- It's good.

- Ice creams coming up.

- Oh! - Oh!

- This is hard.

- I'm the king of bougie.

- Bougie.

- Bougie.

- Bougie.

- Bougie.

(laughs)

For more infomation >> 'The King of Bougie' 🥂Official Season 1 Trailer | Basic to Bougie | MTV - Duration: 1:01.

-------------------------------------------

Review & How-To: 7th Gen Kindle Fire 7 to Android (NO ROOT) - Duration: 15:17.

what's up everybody Tony here with the Labmetz channel

just gonna do a real quick review and walk through and talk about why I like

these little 7 inch $30 or $40 tablets that you can get from Amazon what you

can do with them and real quick walk through of how to get the Play Store on

them how to set it up and get start getting apps make it look like an

Android tablet so for 40 bucks this little guy can we come in android tablet

and is awesome so I'm gonna jump back to the PC there's a few files that we're

gonna download real quick and then we're gonna get into this

alright so before you

get started on the Kindle we're gonna come here to the computer I highly

recommend you get a micro SD card these things don't have very much memory on

them and if you're gonna download anything on it get a micro SD card to

make your life easier same with getting this whole setup

process done and started so first thing we're gonna do is we're gonna come over

to the Internet to the apk mirror a great site for reputable downloads for

apks they're all good and verified so we're gonna come down here there's four

that we're gonna have to download links will be in the description for all of

them so the first one's gonna be the account manager second is gonna be the

Google services framework third the Google Play services and the fourth one

is the actual Google Play Store I highly recommend downloading the ones that I

have linked below because these are all for android 5.1 and if you try and use

the newer ones this process may not work this is a brand new tablet it arrived

from Amazon today June 14 2018 so as of today this process works so let's

jump over to the overhead look at the tablet and get everything going now that

we have these files on the SD card ready to go

now that you got your tablet brand-new like I said we just bought this guy

today I already did go ahead and open it

because my son of course couldn't wait to see what it actually looked like like

it's gonna be some sort of special something or another but it's another

Kendall so we're go ahead and take out all of

the crap get the actual tablet like I said it hasn't even been opened yet

still sealed in its little packaging all right we'll set that down get all the

boxing out of the way and then we've got our micro SD card we've got a charger

this is really all you need for the tablet charger tablet micro SD card good

to go all right but satisfied we're gonna stay

here we're gonna actually turn this guy on and do some stuff to it I guess I had

brand new fire setting it up for the very first time

let it load here we go okay Cheers our language English of course Oh find my

Wi-Fi go ahead and connect to that real quick all right let's go ahead and

connect to the internet due to too low it's gonna look at some updates probably

I think that'll probably be an update or two maybe

all right yeah my Tony I am indeed so we'll go ahead and just

click yep that's me fetching in details no do not restore we're gonna turn off

the backup the rest of the three I go ahead and leave on now I'm gonna do any

of the profiles just to make this a little bit easier same with the social

stuff we're just gonna continue on past all this I do sign in to my fires a lot

of people don't it makes it easier to get rid of the odds just because they

won't be there if you do that but ah whatever we're gonna exit the Alexa

thing because we're not actually gonna use it alright so once you get to the

home screen you're gonna want to go ahead and click on the App Store search

type es search we are gonna go ahead and do this ES file manager here this is

what I recommend it is the best a lot of people have reported that this tutorial

the steps won't quite work very well I've used es every time works flawlessly

so we're gonna go ahead and download that and if you notice yes in the lock

screen currently when I click it oh I don't have ads I don't know why I don't

have ads you know what I got on chat and I talked to the people of support people

about my other three handles because they're starting to slow down because

the ads and I know that that's a way to get him removed talking to the chat

people and I talked to them about doing that after this one was ordered I wonder

if they removed my ads from this one anyways cuz there's no ads that's funny

well I'm okay with that so I can't show you the process to remove the ads on

this guy alright so once you get a yes installed go ahead and load it up go to

the SD card I created a folder on my SD card out of Google so that's where all

my documents are gonna be these are the ones

you're gonna need so the first one will be the one that's called calm Google

Android dot GS F dot login and then I don't have a bunch of version number

that is the first one that you're going to want to install when you click the

install for the first time you will get a pop-up warning installation it's

blocked just go to settings over here I know outsources okay good while you're

in the settings and over here I like to go to the device options come down here

tap on a serial number until the developer options pop up go ahead and

open this just go down a little bit it's like you get to window scale and

animation turn this 2.5 on all of these here helps speed it up a lot a little

bit the last thing I also like to do on these is turn off the don't keep the

activities now way when you leave an app it automatically shut it down go ahead

and swipe out of there and there we will come back to ES File Explorer oh right

exit this just another one of their little ads and we'll do it again

install come here hit the install button install this one real quick this is the

first of the four like I said this is the Google Account Manager done come

over here go back we're gonna do the second one

pesky ads install that that's gonna be the Google services framework do that

these first two ones as you can see are done really fast this Google services

the Google Play services this here one that we're about to do this one takes a

little while so once you've hit it just let it sit it'll take a minute and it

will finish eventually

you

I notice as I'm sitting here waiting and now that it's actually finished there's

a perfect picture of my camera right there it's like a mirror there it is

right there that's the camera all right we're gonna have done now this hats done

last one you were gonna install the Play Store itself this one will also take a

little minute it's a little click install come down and hit install and

let that roll for a minute

you all right once the Playstore says that

it is installed you're gonna want to go ahead and hit done you can go ahead and

go to the home menu at this point and we were going to go ahead and turn the

tablet off and back on alright so once you who have restarted the tablet you'll

have these two new icons here Google Play settings and the Google Play Store

go ahead and click on the Google Play Store and it should ask you to go ahead

and login just like this sometimes the first time you click on the icon it will

exit you just go ahead and click on it again it's happened to me on pretty much

every device that I've done it on the first time you click on the store it

kicks you out but then just click on it again it'll come right back alright so

once you do that get all signed in except little service terms alright once

you're signed in and you go to the Play Store to make it look like an Android

get nova launcher just type nova download nova launcher if you purchase

for prime i'd love nova launcher so I use it on like I really enjoy device so

I pay for the prime as well go ahead and install these apps

oops I forgot to let it go install install go ahead and install those two

guys and then while we're you know what while we're waiting on those we're gonna

go back to the Play Store I hate the regular browser so I am a stickler for

Chrome swear I'll install columns

so I've heard of people getting less air we're gonna go ahead and cancel all of

these updates make sure the Kindle itself is fully up to date go to

settings twice options and system updates let's

take a look what we have here we are highly out of date that is definitely

true we are gonna go ahead and update this to the latest OS and then we'll

come back so we're back we got all these updates done and out of the way

but anyways did all the updates the Play Store still works through the updates so

that's awesome for everybody who want to would be interested in that if you do

the updates they will still work now let's go in here as you noticed chrome

was installed so it looks like the installs are working looks like

everything's been updated correctly there goes it's installing I'm gonna go

ahead and install the other one for prime Nova like I was saying I'm a big

fan of the Nova Launcher so I own him and I enjoy using them alright so those

are getting installed like I said I already had Google Chrome installed

chrome is gonna be needed for this next part you can use the silk browser that

comes with the fire tablet but I'm not a fan of it

turn that off continue no thanks okay we're just going to come up here we're

gonna do a quick search for a launcher

hijack

this is what's gonna allow us to really make this a Android tablet so it'll be

the first link nine times out of ten actually pretty much ten out of ten I

remember out it not be the first link once you get to the website on XDA you

don't want to click the little find the latest release here I'll take you here

download not that link oh no no no download the top one there I use yes

downloader always just seems to work better for me and some people report

having an install button problem I've never had that using yes so I'll go

ahead and install this it did haha there it is laundry hijack so we're gonna go

ahead and set Nova as our launcher and come back over here

go to settings go all the way down here to accessibility scroll all the way to a

bottom Nova launchers on click okay back turn the detect button on it okay

all steps were done correctly when you hit the home button it'll take you to

Nova it's skip damn Android tablet there you

go hit home button will always bring you back to your Android might flash like

that every now and then but for the most part you're getting any Android turn it

off in the back on you got an Android tablet Google Play

Store everything works like I said it's got awesome much better alright so there

you have it there's your little way to turn this little 40 dollar Amazon tablet

into a pretty nice little Android tablet and I say that it works pretty well I

like the fact that this one doesn't have ads right now

I don't know why that I didn't get one with ads thanks Amazon appreciate it but

I should get one tomorrow that will have ads that will allow me to sit down and

show you how to do that too part of this tutorial that way you wouldn't have ads

on the tablet and then you pretty much have any Android tablet and no routing

no hacking easy simple easy way to do it so give it a thumbs up go ahead and

share subscribe do all that good stuff and I'll catch you later so you at the next one

peace

For more infomation >> Review & How-To: 7th Gen Kindle Fire 7 to Android (NO ROOT) - Duration: 15:17.

-------------------------------------------

Colley: «Samp, voglio essere il tuo leader» - Duration: 5:19.

For more infomation >> Colley: «Samp, voglio essere il tuo leader» - Duration: 5:19.

-------------------------------------------

How to Paint a Woman's Face in Watercolor - Duration: 5:30.

Hello my friends and welcome to another Tuesday of tutorial!

I am Leonardo Pereznieto and today we will paint a face with watercolor.

We begin applying some purple for the hair, and also for some of the main shadows.

Like so.

I´m doing it on dry paper, but wherever I don´t want a line to be marked,

I get the paper wet with other clean brush and water.

So as to smudge it. I sometimes do this with the left hand so that can work

with both at the same time.

And we did the pupils…

like so.

I know right now they look a bit strange [laughter].

The iris, very lightly for now,

and we continue with some of the shades.

As you see, we are doing light washes.

Let´s give more color, a grayish blue to the iris.

I´m using a fine round brush.

The upper part of the eye will be darker because of the shadow that it receives.

Very good!

Now she is looking [laughter].

The eyebrows… and we will darken this area a little bit.

By the eye. I smudge and integrate it with a wet clean brush, and we can add

the shadows on the lower part of the nose.

Let´s darken this line by the upper eyelids and then we can begin painting the lips.

I´ll use a reddish brown for this, like a burnt

sienna, with a little bit of red.

I know, her eyes are not looking toward the same spot

I noticed that too, don´t worry, we will fix it in a little bit.

But now, we add some color to the skin. Again, some burnt sienna with a little bit of

red, and for the areas of light some yellow.

And darken the hair and the shadows.

This as you see is not going to be a realistic portrait, it is going to be more

creative.

What I mean is that we can use our artistic license to change the colors

and the reality.

We can create our own reality

which is the magic of art.

We darken the areas of the hair that are in shadow,

and give some color to the rest.

And I feel we need a little bit more contrast

so let´s add some more dark.

As you can see, the watercolor when it dries, it lightens.

So you may want to apply it a little bit darker than what you intend it to be in

the end.

And let's some more brown to the brows.

The list of materials that I am using for this project,

is in the information below the video.

When you paint in watercolor a key factor for success

is that you use a good paper,

a good watercolor paper.

As it needs to absorb and hold the water.

And I ´ll darken everything from the height of the brows down to the nose.

I know right now it doesn't make a lot of sense but it will.

Now I want to add some colors to the background and integrate the hair and face to it.

So let´s get everything wet and drop some colors.

This is really fun!

I left a dry square toward the top left to have something like a light over there.

Now the hair will not have a sharp end against the background, but it will be very soft.

This side of the nose will be in shade.

You may apply the paint with the brush and if it is too much, you can easily pick some with

a tissue.

Also with a brush you can lightly scrub a wet area, if you want to lighten it

or to soften or erase the edge of a line.

Like on the forehead, I get it wet and rub slightly to get a highlight.

If you are using soft or natural brushes, you may want to switch to a harder one

for the rubbing.

Let´s add some little tone and texture to the lips.

And now let´s go a little bit more wild, I want some splashes and drippings.

We can lift the paper so they run.

Let´s do some other ones, this is so cool.

All right!

And now let´s drop some other ones of this side.

And some more.

Very good!

¡Excelente!

Let´s do some final ones like this,

and it´s ready!

If you enjoyed it please give it a LIKE! share it to your friends

and subscribe to Fine Art-Tips.

And I will see you, on Tuesday ;)

Subtitled by Grethel Trejo

For more infomation >> How to Paint a Woman's Face in Watercolor - Duration: 5:30.

-------------------------------------------

LEGO Ninjago Dieselnaut set review! 70654 - Duration: 18:15.

hello everyone this is diesel not one of the big sets for season nine hunted for

lego ninjago let me go ahead and distribute some of these figures in and

about the diesel not vehicle and give you a good look at its features and

details now this to me does look like a little bit of a mess at first glance but

I feel like if you actually go through the process of building this or you

spend some time with it you'll start to understand what it's all about what

they're going for it believe this is supposed to be that Mad Max sort of

style you know and post pop post-apocalyptic world sort of cobbled

together Mean Machine it's sort of a half track like a reverse half track and

the rear tires are not the same size so the rear most ones are a fair amount

larger in diameter than the middle ones though of those wheels are the same size

there's a little bit of asymmetry from left to right and there's no semblance

of symmetry from front to back there are a lot of things you can do with this on

it and with it things that make sense things that aren't just forced action

features like for instance over here on this right side there's this crane and

it can be moved from side side and you can raise and lower the hook let's see

that's about as far down as it goes it's more of a I guess a grabber arm you can

open these up and close them use them to grab something but it's a simple

mechanism here to winch that up but you know it does something up top well this

gear is intended to be turned I'm so glad that it's not a bright red or

bright yellow thing just kind of fits into the scheme here it's for turning

that top turret around it goes a full 360 degrees and never stops there's

nothing to keep you from making it spin so there's no there's no string or

anything inside there to get wound up so you can rotate this around you can angle

this up and down a bit and that just has a spring-loaded shooter in it so it's

supposed to be kind of a ballista turret there

they have a total of three of those bolts those orange bolts included in the

set let me show you what's on the other side because there's another turret over

here as well it's supposed to be more of a spear shooter and it's just more of a

point defense thing doesn't turn quite as far mostly has that arc towards the

fronts a little bit more than a 90 degree arc that's supposed to be a

ladder to get up there has another spring-loaded shooter built into it this

one can be angled up and down but as you see the the jumper here starts to get

pulled up so if you want to angle that frequently I recommend just leaving that

jumper piece out right now it's just helping to keep everything a little bit

more secure as it is this is actually a print on this dish here and that turns

when you turn the gear from the other side going with the turret up above and

before I start to move forward again all this is a thing this comes down that's

interesting so it can be used to drop something off or pick something up and

in this case all of this is something that can be trucked off or picked up

it's a mobile jail well trap style jail something like that I think this is a

new piece for this net part here in the black color most recent version of it

and this works pretty well this can hold three figures inside you can open up

both sides like that's pretty easy to get it to be connected to the thing see

some bright colors just inside there they're a little bit a little bit off

from the overall scheme but it's not too bad see a little bit of the mechanism I

think that's actually cool to see a little bit of the mechanism on something

of this style and then this also comes out this is a whole weapons rack and

there are a number of new molds included here the sickle I don't even know what

that double bladed thing is supposed to represent this is more of a side here

than new short blade new medium blades pretty cool stuff they just give you a

whole bag and you'll see a few more of those with the figures when I look at

those more closely but these ones that are attached to the hilts here have

short bar ends very stubby which make them

good for making custom weapons like you can take two of this blade and take off

them the bar from there make it double-sided they're just good good food

for customization and you can just take this out and display it somewhere either

all the way like this as part of a wall or set it up like that to have a little

bit more shape but it just stores away inside of here nicely in the center mass

of the vehicle there's a another area that can be affected that can be changed

you can open this up so two things you can do here you can open up these sides

and then you can have some seated figures that you can place here or you

could bring these out all together if they look really cool and with that the

kind of teeth they're being able to rotate it feels like it could claw

something up be used as a defensive weapon or something I'm not sure they

don't really position this as an additional thing to play with but it

looks like it's it's meant to do something more than they say I mean at

least these can be used this kind of guards to hold a figure in but

unfortunately there's not enough space to make figures sit if these doors are

gonna close up all the way I don't know definitely play around with that a

little bit if you get this set but at the very least you end up with a

platform here in the center you put a bunch of figures around that four-point

defense and there's also one additional detail I don't know if it's intended to

be opened up but you can open this up here and see a little bit of engine kind

of air inlet action going on there and some engine detail down beneath a little

farther forward there are a couple of floodlights here or searchlights those

going to be rotated and turned up so I can face just about anywhere give some

additional additional you know viewing power for the thing although they're not

able to really shine forward but one of the reasons to get them to angle back is

to open up the whole cockpit section here which is actually not that useful

it just holds one single figure in there I believe you can make a second figure

sit back there I only have a couple of studs maybe you can even figure out a

way to get three in there but they don't make it easy for you

there's no console or steering control or anything in there but it's so far

down in there I'm okay with the level of detail in there but would have been

better if they had made it a little easier to accommodate multiple figures

down in that position and then this is kind of a turbine entry or just a fan

box and that that is really nice when this gets closed up because that just

fits in that space really well there is one major disappointment about this

diesel not for me that is rolling rolling rolling rolling doesn't really

roll at the front the tracks I have just spoke about this in a recent review and

a completely different theme that a lot of toys that have tracks don't work very

well the tracks at least to themselves don't work very well and that's the case

here they actually do give us a generous number of little rubber pads to insert

into these treads so every other treads segment has a piece of rubber stuck in

it for attraction but it's just too tight they should have given more links

or just change the geometry a little bit because this is not loose enough to

allow it to to work on on hard surfaces the nija in this set are obviously on

the Left J in the middle Zane and on the right awkward teenage facial hair whoo

he's growing so fast why is his head hair white already and why is his facial

hair still black that's that's weird he's funny-looking notice that the

katana for J and for whoo same setup for each feature two pieces so you actually

have a brand new katana blade piece with just a short tang basically not even a

full hilt built into the mold for it so that's a brand new piece there that

allows you to add your own hilt onto it and J over here also has this sickle

that's a brand mold right there the sickle and chain a

weapon that's known as kusarigama might be pronouncing it wrong sorry but it's

it's a sickle and chain basically and I think all of these look pretty good that

way and get this rotated around obviously I need to remove some stuff so

you see some more details excellent alternate faces for Jay and Wu no

alternate face for Zane because they need to show the port on the back that

will work much better when he has his hairpiece on unfortunately there's no

hairpiece included for Zane nor for Jay I wish they would change that and start

including those with with these sets it's only one piece per characterization

cost that much extra but there's a better look at the main faces there and

obviously wu has just found some clothing in the realm that they've been

transported to go again he's been growing very quickly so he needed to

basically find whatever he could on the bad guy side here on the left is the

boss man iron Baron with his staff he has a shield blade there another new

piece that's intended to represent a tanto blade a traditional Japanese tanto

not American tanto style it's more common amongst Westerners but his hand

is intended to represent a cyborg arm robotic arm basically and so that's

actually his hand there at the end it's not part of a separate weapon or

anything it's kind of kind of long kind of sticks out but again pretty good

details here on the right is skull breaker whose gist's yeah just a

henchman I tried to put a lot of detail into the torso there I feel kind of

needs just another piece but he is one of the least armored bad guys in this

entire series so you know they have to have a little bit of a range the the

kind of neck armor face guard neck guard single pauldron piece that's used there

on iron Bell on the Baron is a reversible piece

and you will see that reversed in just a moment let me take once again some of

this stuff off so no alternate phases for either of these but you see a

similar level of detail between the two torso prints not the highest level of

detail that they've done kind of a little bit more cartoony and some things

that they've done in the recent past so not that great there but there are there

their main phases and do note that the EXO force handpiece for the Baron is in

orange there don't believe I've seen that in orange before there are two of

those included in the set correction there are three of those included in the

set because a heavy metal there on the right has one on his chain rifle they

call that weapon has the semi transparent orange chain attached to it

doesn't actually shoot but looks interesting and at least it's a weapon

that you actually build up yourself and on the left is a character called muzzle

on each of these you see that that piece though showing you on the baron reversed

around so this is the other way that can be applied I think it looks equally good

either way works out just fine notice that the prints are the same

between these two for the torsos and hips and the legs the differences are in

the accessories and the head pieces with the headpiece for muzzle on the left

being identical to the one that you saw for skull breaker one last very

important inclusion in this set is not really a figure but it's kind of a

stand-in for a figure it's kind of an armor stand I guess you would say statue

that is set up with some of the new dragon armor and also a dragon weapon

the shield is a brand new print as a printed piece there it is set up as an

actual shield so it can be easily held in the hand of a figure got the dragon

bones sword behind there let me actually remove the shield so that you can see

the sword and the shield has the gold color behind

it's actual plastic color this is dual moulded with a bit of marbling of the

tan and silver together got that nice dragon head hilt piece which looks

fantastic to me it's my favorite piece I believe in this entire set and then the

dragon plate armor piece that's mostly covering up the shoulders in the dragon

armor helmet this does a great job also of highlighting the differences in the

two gold colors you have the more traditional or longer-lasting pearl gold

color and we've had for quite a while used for the helmet there but then the

armor piece below the chest armor piece as the most recent golden that is less

orange it's not quite as bright it's a little bit more of a true gold hue but

it's not as shiny so I don't know I actually like the slightly darker one a

little bit better it's just it's just closer to the actual color of gold but

then it doesn't have as much metallic flake in it or them time flayed it flake

is at least at least thinner or smaller pieces but again really nice sculpting

with the dragon head piece that's built into that of course these are

collectibles you'll be able to get more with different sets and you can put them

on whatever figures you like so what about price and value well looking at

just the numbers it looks pretty reasonable to me actually especially

based on our price to part ratio basis there are some small pieces but there's

a larger than normal number of large pieces here so that brings in even more

objective value I do feel like the entire vehicle doesn't feel to me a 100

or 110 dollars us large but it is pretty dense there's a lot of detail in it and

there are a lot of things as you can do with it so it kind of makes sense if

they had made a $110 set of this you know

five years ago or maybe even ten ten years ago it probably would have had a

similar sized vehicle but it would have been very Hollow wouldn't have done very

much and then they would have had additional builds that would have made

it feel a little bit larger so all things are kind of relative in in that

sense I think the figures are pretty good I'm not entirely impressed with the

the graphic design work done for the hunters for this season it's just this

is not up to par I feel with the current state of the art for Lego I think that

the ninja just get much better work done for their prints the stickers in this

set I think are perfectly fine and there aren't too many of them the action

features in general work pretty well or integrated pretty well do wish that you

can put more people into the cockpit that definitely feels like a Miss and

then this platform back here just do you hate to do something with those spikes

they seem really cool to me but they those combined with the doors limit the

amount of space in here when everything is closed up so I do recommend a little

bit of customization to open that up so you can store people in here or store

cargo in here what are the two definitely could have some better use of

space and you can make that happen fairly easily but overall I do feel like

the the value here is pretty good this is a proper playset this is something

that kids can really be proud of I think the color scheme and general mix of

things may turn some people off just at initial sight but if you give it a

chance if you really look at what you get here and hopefully I've I've shown

enough of that in this video I think it'll it'll convert some initial

skeptics but then you know some folks just won't like it ever and that's

perfectly fine there's nothing wrong with that it's definitely not a type of

design and theme that everybody is gonna like but overall I think Lego has done a

pretty good job with with this as a toy playset oh oh except for of the

that's definitely a miss if there's if there's one thing that I would call out

hasn't miss here it's it's that things that are supposed to roll should roll

things are supposed to turn should turn that's that's kind of a must so yeah you

got a ding the designer for that one otherwise though pretty good let me know

in the comments though what you think about this feel free to disagree with my

own opinions as long as you do it respectfully it's all good thank you

very much for watching and I will bring you the next video as soon as I can bye

for now

you

For more infomation >> LEGO Ninjago Dieselnaut set review! 70654 - Duration: 18:15.

-------------------------------------------

WHAT is GDPR? 4 (Simple) Tips to Get Your Company GDPR Compliant - Duration: 5:56.

For more infomation >> WHAT is GDPR? 4 (Simple) Tips to Get Your Company GDPR Compliant - Duration: 5:56.

-------------------------------------------

Senate Jaws Dropped To The Ground After IG Horowitz Dropped A BOMB On James Comey - Duration: 1:25.

For more infomation >> Senate Jaws Dropped To The Ground After IG Horowitz Dropped A BOMB On James Comey - Duration: 1:25.

-------------------------------------------

How to replace rear suspension arm VW PASSAT VARIANT B6 3C [TUTORIAL AUTODOC] - Duration: 7:57.

Loosen the wheel mounting bolts.

Remove the rear wheels.

Use a socket №21 and a combination spanner №21. Disconnect the lower arm from the pivot.

Use a torx №M10. Disconnect the transverse stabilizer fastening.

Use a socket №18 and a combination spanner №18. Unscrew the arm fastening from the subframe.

Remove the arm.

Install a new arm.

Use a socket №18 and a combination spanner №18. Screw the lower arm fixing bolts, but don't tighten them.

Use a torx №M10. Connect the transverse stabilizer fastening.

Support the arm.

Use a socket №18 and a combination spanner №18. Tighten the arm fastening.

Remove the support from under the arm.

For more infomation >> How to replace rear suspension arm VW PASSAT VARIANT B6 3C [TUTORIAL AUTODOC] - Duration: 7:57.

-------------------------------------------

35 Incredible Garden Design Ideas of All Styles - Duration: 4:10.

For more infomation >> 35 Incredible Garden Design Ideas of All Styles - Duration: 4:10.

-------------------------------------------

Musica 🅼🅾🅻🆃🅾 Rilassante - Rilassamento Profondo - Pianoforte Rilassante - Duration: 1:02:58.

For more infomation >> Musica 🅼🅾🅻🆃🅾 Rilassante - Rilassamento Profondo - Pianoforte Rilassante - Duration: 1:02:58.

-------------------------------------------

As a dog Cane Corso is bathing. # Canecorso - Duration: 2:33.

For more infomation >> As a dog Cane Corso is bathing. # Canecorso - Duration: 2:33.

-------------------------------------------

Every Senators Head Spins After Sen Kennedy Blew Horowitz Out Of The Swamp - Duration: 2:25.

For more infomation >> Every Senators Head Spins After Sen Kennedy Blew Horowitz Out Of The Swamp - Duration: 2:25.

-------------------------------------------

Dadi Love LIVE Groupe Dadi Love - Duration: 9:15.

For more infomation >> Dadi Love LIVE Groupe Dadi Love - Duration: 9:15.

-------------------------------------------

중국에서 황금빛의 거대한 도넛형 UFO 연속 출현! ► [ 세계 발견 ] ► https://goo.gl/ETXKoe - Duration: 3:07.

For more infomation >> 중국에서 황금빛의 거대한 도넛형 UFO 연속 출현! ► [ 세계 발견 ] ► https://goo.gl/ETXKoe - Duration: 3:07.

-------------------------------------------

Liberal Law Prof: IG Report Supports Trump, POTUS Had Good Reason to Fire Comey - Duration: 1:50.

For more infomation >> Liberal Law Prof: IG Report Supports Trump, POTUS Had Good Reason to Fire Comey - Duration: 1:50.

-------------------------------------------

With great pleasure I'm Introducing my assistant Sandra - Duration: 0:24.

Hi from La Casa de Ana today I'm glad to introduce you my asistente . Hi every one

my name is Sandra I'm Ana's assistant and it will be a pleasure to welcome you here at La Casa

de Ana and to help you in everything that you may need to have a great vacation here

in Cuba and remember , La casa de Ana is Your Casa in Havana

For more infomation >> With great pleasure I'm Introducing my assistant Sandra - Duration: 0:24.

-------------------------------------------

120 Cool Ideas for Gardening with Recycled Items - Duration: 15:11.

For more infomation >> 120 Cool Ideas for Gardening with Recycled Items - Duration: 15:11.

-------------------------------------------

Abandoned greenhouses of flowers - Duration: 4:33.

Liguria

Province of Imperia

A few miles from the city of San Remo

Area popular for the flowers

Here they were cultivated many types of flowers

Dozens of people worked here

The company offered these houses to workers

They are homes of the early 50s

They were inhabited by several families

The greenhouses was closed in the first years of 2000

The bankruptcy occurred between 2004 and 2005

It closed suddenly

All the houses have a beautiful view

Surprising they are uninhabited

They are noted the first signs of decay

An unusual abandoned place

Thanks for watching

Không có nhận xét nào:

Đăng nhận xét