Youtube daily Nov 28 2017

Normally when you use face unlock on your Android device the keyguard will remain up

until you physically touch your device.

With AutoInput you can make your device's lock screen go away as soon as your phone

recognizes your face!

It works for Android 7 and up, but the setup process is a little different on Android 8

and and 7 so I have both versions here to show you.

On the left we have a Nexus 5X with Android 8 and on the right a Nexus 6 with android

7.

The first part is similar on both Android versions: you have to go to Android settings

and enable Trusted Face under your Smart Lock settings.

Now Go back to AutoInput.

On Android 8 all you have to do now is enable the option to automatically dismiss the keyguard

and that's it!

Now when your phone recognizes your face the lock screen will go away automatically!

On Android 7 you have to enable AutoInput's accessibility service before you can use this

feature.

Then it should work as well!

You probably noticed that the unlock animation seemed a little stuttery there.

Thankfully on most devices this can be fixed by fiddling with these settings.

For example, on my Nexus 6 I can set the bottom margin to 1000 and the speed to 250 and the

unlock process will be much smoother.

Play around with these settings to see what works best for your device.

Enjoy this new standalone feature and don't forget...

For more infomation >> AutoInput - Face Unlock On Any Device - Duration: 1:54.

-------------------------------------------

TRY NOT TO LAUGH - Funny Animals FAILS Compilation 2017 | Funny Animals vs Kids Fails Videos 2017 - Duration: 10:15.

Thanks for watching

Hope you have a great time

Please, like, comment and subscribe for more!!

For more infomation >> TRY NOT TO LAUGH - Funny Animals FAILS Compilation 2017 | Funny Animals vs Kids Fails Videos 2017 - Duration: 10:15.

-------------------------------------------

Sunny, breezy and warm Tuesday - Duration: 1:17.

For more infomation >> Sunny, breezy and warm Tuesday - Duration: 1:17.

-------------------------------------------

Regenerative Music For Mind - Soothing Music For Body And Mind - Duration: 2:03:54.

Regenerative Music For Mind - Soothing Music For Body And Mind

For more infomation >> Regenerative Music For Mind - Soothing Music For Body And Mind - Duration: 2:03:54.

-------------------------------------------

Fantastic Four: Rise Of The Silver Surfer (2007) CLIP 10 | CoolestClips 4K - Duration: 2:59.

Reed, don't agree to this.

Let's see what he's got.

L made a detailed recording of our little encounter.

All that you know is at an end.

Well?

L like the part where he knocks you on your ass.

Look at where the energy levels surge when he attacks me.

There? See what happened?

The energy was channeled through him, but it originated from his board.

If we can separate him from the board, we can cut off his power completely.

- That's what we have to do. - How?

If l knew that, l wouldn't need you people, would l?

You two should get started right away.

I'm glad we have the opportunity to collaborate again.

I'll try to talk slowly so you can keep up.

How can we be working on the same side as Victor?

You got me. Things were simpler when l could just whale on the guy.

What's he doing? A fire.

Look at that.

I'll pay for that.

I'll tell you, Ben, I'm starting to feel like a complete screw-up.

Hey, hey, you're not a complete screw-up.

Thank you.

Look, kid, it's out of our hands. Lt's up to the eggheads now.

You think Reed's right about the whole end-of-the-world thing?

He's never been wrong about this kind of thing before.

You know, I'm not exactly a deep kind of guy.

Really?

But if Reed's right, and this is it...

how do you want to spend your last few minutes?

Part of me would like to go out fighting.

But the truth is...

I'd like to spend my last couple of minutes holding Alicia.

That sounds pretty good.

L mean, not the "holding Alicia" thing. She's your girlfriend, not mine.

Want nothing to do with her. Not to say she's not attractive.

She's very attractive. She's so attractive.

Even with the... l can't think of a guy that wouldn't want to...

What l meant...

was that it's nice to have somebody.

Well, you got me, pal.

For more infomation >> Fantastic Four: Rise Of The Silver Surfer (2007) CLIP 10 | CoolestClips 4K - Duration: 2:59.

-------------------------------------------

Jeep Wrangler Smittybilt GEAR Overhead Console (2007-2018 JK) Review & Install - Duration: 3:28.

This Smittybilt GEAR Overhead Console in black is for those of you that have a 2007 and up

JK that are looking for an overhead console with the ability to store a bunch of additional

gear in it.

This is going to come with six different storage bags, so you can put everything from small

items, flashlights, whatever you might need up in this overhead console area.

And it's going to add a lot of organized storage space to a Jeep that otherwise doesn't have

a ton of it.

This is going to install pretty easily into your Jeep.

There may be a little bit of drilling involved, depending on what year your Jeep is and how

the factory footman loop is attached to the top of the windshield.

But even with that possible drilling necessary, I'm still gonna give this an easy one out

of three wrenches.

Probably less than an hour to install, and we'll talk more about that installation in

just a second.

As far as the construction goes, like I said, this is really going to be two or maybe three

main pieces depending on how you break it down.

You're going to have your steel frame here, which is going to mount between the windshield

frame and your sport cage, and then you're going to have the soft materials here which

are going to be your six bags and the material that it attaches on to.

All of this is going to attach with Velcro and with snaps, again, using that MOLLEE or

PALS system.

So these can be taken on and off very easily, moved around into different configurations.

And like I said before, these will attach to anything else that has that same MOLLE

or PALS configuration, so you can move them to the Smittybilt GEAR Seat Covers.

You can mix and match your pieces.

You can move things around to exactly where you need them when you need them.

So like I said, I'm gonna stick with a one out of three wrench installation.

The first step in the process is going to be removing the plastic piece of trim across

the top of your windshield frame, and then behind that, you're going to have your footman

loop.

Now, on some year Jeeps, you're gonna just be able to unbolt that footman loop and move

on to the next step of the install.

In other years, that footman loop may be riveted in place, in which case you are going to have

to drill out those rivets.

Now, even though there is some drilling, it's still going to be a pretty easy install.

We're sticking with one out of three wrenches.

You'll just have to have a drill and some drill bits handy to drill out those rivets.

Once they're gone, there's going to be a nut plate that you can slide in behind.

Attach your adapter bracket, and then move on with the install as if your footman loop

was bolted in place.

You're gonna be able to attach the main frame of this onto the sport cage, onto that new

adapter bracket that you just added.

And once the steel is up there, it's just a matter of using the attached Velcro straps

to attach the rest of the material onto the steel, and then figure out where you want

your storage bags and get those attached as well.

This whole set up here is going to come in at right around $170, and I do think that

that's gonna be a pretty fair price for what you're gonna get here.

You are gonna get a very strong steel frame that's going to attach very easily into your

Jeep, and then you're going to have all of the functionality and all of the flexibility

with these MOLLE or PALS style bags and storage containers so you can move things around exactly

where you want them.

And because of that flexibility, and because of that functionality, I do think you're getting

a lot for your dollar.

So if you're looking for a unique overhead storage solution for your JK, I definitely

recommend taking a look at this unit from Smittybilt, and you can find it right here

at extremeterrain.com.

For more infomation >> Jeep Wrangler Smittybilt GEAR Overhead Console (2007-2018 JK) Review & Install - Duration: 3:28.

-------------------------------------------

🎮 Puppy Life Secret Pet Party - Fun Games Care & Play for Toddlers, Children - Duration: 14:48.

🎮 Puppy Life Secret Pet Party - Fun Games Care & Play for Toddlers, Children

For more infomation >> 🎮 Puppy Life Secret Pet Party - Fun Games Care & Play for Toddlers, Children - Duration: 14:48.

-------------------------------------------

Install Jeep Wrangler RBP RX-3 Cab Length Step Bars (2007-2018 JK 2 Door) - Duration: 2:41.

Today we are installing the RBP RX-3 Side Steps, which fit all 2007 to 2017 two-door

model Wrangler JK's.

The required tools for this install are a 13 millimeter wrench, a 13 millimeter socket,

a 3/8 ratchet, a 3/8 impact drill.

Select the passenger side RX-3 Side Step.

The angled end goes towards the front of the vehicle.

Start the installation on the passenger side of the vehicle.

Locate the two pairs of holes in the pinch weld.

The tabs on the front bracket will attach to the forward mounting hole, while the mounting

tabs on the rear bracket attach to the rear hole in the pinch weld.

If necessary, hold the passenger side RX-3 Steps up in position to help determine the

correct mounting holes to use.

Line up the brackets on the steps with the holes in the pinch weld.

Select one 6 millimeter hex bolt from the hardware bag.

Use the 6 millimeter hex bolt to check for clearance on each of the holes in the pinch

weld.

Due to manufactures tolerances it may be necessary to use a 5/16 drill bit to open up the holes

in the pinch weld.

With assistance, attach the step to the mounting holes in the pinch welds with two 6 millimeter

hex bolts, four 6 millimeter flat washers, and two 6 millimeter nylon nuts.

Leave the hardware loose at this time.

Line up the top mounting tabs on each of the brackets with the hole in the bottom of the

channel.

Attach the top tab on the bracket, to the threaded hole in the floor panel with one

8 millimeter by 30 millimeter hex bolt, one 8 millimeter lock washer, and one 8 millimeter

flat washer.

Hand tighten at this time only.

Repeat as required for the remaining bracket.

Once the step is fully installed, adjust and align the step to the sides of the vehicle.

Tighten the two 6 millimeter hex bolts in the pinch welds first, then move to the two

hex bolts attaching the top tab to the bottom of the channel.

Torque all hardware to 20 foot- pounds, 8 millimeter hardware to 16 foot-pounds.

Repeat the previous steps to install the driver side RX-3 Step assembly.

You have now completed the install of your RBP RX-3 Side Steps, which fit all 2007 to

2017 two-door Jeep JKs.

For more infomation >> Install Jeep Wrangler RBP RX-3 Cab Length Step Bars (2007-2018 JK 2 Door) - Duration: 2:41.

-------------------------------------------

Molana Tariq Jameel Latest Bayan About Husband and Wife Disputes 28 November 2017 - Duration: 22:49.

Molana Tariq Jameel Latest Bayan About Husband & Wife Disputes l 28 November 2017

For more infomation >> Molana Tariq Jameel Latest Bayan About Husband and Wife Disputes 28 November 2017 - Duration: 22:49.

-------------------------------------------

Vermont businesses encourage cyber monday - Duration: 1:37.

For more infomation >> Vermont businesses encourage cyber monday - Duration: 1:37.

-------------------------------------------

How 2 Women Built A Multimillion-Dollar Exercise Business Called Tone It Up | Megyn Kelly TODAY - Duration: 6:27.

For more infomation >> How 2 Women Built A Multimillion-Dollar Exercise Business Called Tone It Up | Megyn Kelly TODAY - Duration: 6:27.

-------------------------------------------

Monday, November 27th: The Kindness of Strangers - Duration: 7:50.

For more infomation >> Monday, November 27th: The Kindness of Strangers - Duration: 7:50.

-------------------------------------------

Racist Liberals Furious Over "HIDDEN MESSAGE" Melania Snuck Into WH Christmas Decor | Breaking News - Duration: 3:39.

Racist Liberals Furious Over 'Hidden Message' Melania Snuck Into WH Christmas Decor

Racist Liberals Furious Over 'Hidden Message' Melania Snuck Into WH Christmas Decor

Racist Liberals Furious Over 'Hidden Message' Melania Snuck Into WH Christmas Decor

Racist Liberals Furious Over 'Hidden Message' Melania Snuck Into WH Christmas Decor

Racist Liberals Furious Over 'Hidden Message' Melania Snuck Into WH Christmas Decor

For more infomation >> Racist Liberals Furious Over "HIDDEN MESSAGE" Melania Snuck Into WH Christmas Decor | Breaking News - Duration: 3:39.

-------------------------------------------

FREEVØ - Lungs - Duration: 4:07.

FREEVØ - Lungs

For more infomation >> FREEVØ - Lungs - Duration: 4:07.

-------------------------------------------

Trace Adkins On His Benefit Concert 'Guitar Legends For Heroes' To Veterans | Megyn Kelly TODAY - Duration: 5:29.

For more infomation >> Trace Adkins On His Benefit Concert 'Guitar Legends For Heroes' To Veterans | Megyn Kelly TODAY - Duration: 5:29.

-------------------------------------------

Thomas Völsch: Der SPD-Politiker ist tot! - Duration: 3:40.

For more infomation >> Thomas Völsch: Der SPD-Politiker ist tot! - Duration: 3:40.

-------------------------------------------

Kako zamenjati končnik na VW SHARAN 7M VODIČ | AUTODOC - Duration: 3:54.

Use an open-end wrench №22

Use a socket №19

Use a special puller to take the tie rod end out

For more infomation >> Kako zamenjati končnik na VW SHARAN 7M VODIČ | AUTODOC - Duration: 3:54.

-------------------------------------------

Fantastic Four: Rise Of The Silver Surfer (2007) CLIP 9 | CoolestClips 4K - Duration: 2:55.

Mr. Sherman, let's take a break.

L know you are there.

What's your name?

Come on, you must have a name.

I'm Susan.

You said you weren't the one trying to destroy our world. Then who is?

- The one l serve. - Who do you serve?

I'm trying to help you, but to do that, you have to tell me the truth.

Please.

Lt is known by many names. My people called it...

Galactus...

the Devourer of Worlds.

Lt must feed on energy to survive.

Both thermal...

and organic.

How can you serve this thing?

Because l must.

Doesn't it bother you, all the worlds and innocent people you've helped destroy?

My service spares my world...

and the one l love.

Why did you try to protect me?

Because...

you remind me of her.

Could you stop the Destroyer if you wanted to?

Lt is not l who draws the Destroyer here. Lt is the beacon.

What's the beacon?

The source of my power.

Your board?

Take joy in the last few hours you have left...

for he is nearly here.

For more infomation >> Fantastic Four: Rise Of The Silver Surfer (2007) CLIP 9 | CoolestClips 4K - Duration: 2:55.

-------------------------------------------

How to Draw a Simple 3D Effect: Woman With Umbrella - Duration: 4:12.

Hello my friends and welcome to another Tuesday of tutorial!

I am Leonardo Pereznieto and today we will do a simple drawing

of a woman with an umbrella, in 3D.

We begin by sketching the head with the hair, then the shoulders

and we come down through the body… and the legs.

We do the arms, her dress and an umbrella.

I want to do a 3D effect in a very simple way.

Let´s see how it turns out!

We shape the legs a little bit better

and she will be standing in water.

She will be coming out of this water,

but the liquid will be only in a small space.

Similar to a photograph

which will be bending up on the sides, just a little.

I will actually correct this to bend it a little bit more.

Like so.

Good!

And now we can start shading.

I´m using a Tutto3 mechanical pencil, which has leads in three

different sizes and three different hardnesses.

The list of materials is in the description below the video.

Here the trick to make this drawing look tridimensional,

is that we are using two different perspectives.

One is the one of the photograph which is like laying down on a surface.

Now, imagine that that piece of paper that I drew at the bottom was a photo,

and that this photo have printed on it the image of the girl with

the umbrella.

It will be in the same perspective as the piece of paper laying down

which is totally different than how we are looking at this girl.

That is, standing up and we are looking at her practically straight

from behind.

As you see, these are two totally different perspectives, and that

is why it looks like she is coming out of the photo.

At least that´s the idea [laughter].

Let´s shade her legs, and… she is wearing a dark coat,

as you see.

Which I make it a little darker, especially I´ll give it some shape

and some volume by adding some shadows.

I am experimenting on how to do simple but effective

3D effects.

Next week I will try another technique

which I just thought of, and which I will test for the first time.

I actually have a whole video playlist, that is a series of videos,

with 3D and special effect experiments

which I will place at the end of this video, in case you are

interested you can just click on it.

And now let´s draw the shade to the paper.

Like so.

The corners will be lifting a little bit.

Although the paper is bending up, the shadow I draw it flat

so as to create the illusion that is lifting.

Ok, that looks better!

And I clean up the drawing a little bit.

As you have probably noticed, I have been using a kneaded

eraser.

Which is my favorite because it is very clean

and you can shape it exactly as you need it.

Very good!

¡Excelente!

It´s ready!

If you enjoyed it please give it a LIKE! share it

to your friends and subscribe to Fine Art-Tips.

And I will see you on Tuesday ;)

Subtitled by Grethel Trejo